HIKVISION ColorVu DS-2CE10KF3T-E Manual do utilizador - Página 10
Procurar online ou descarregar pdf Manual do utilizador para Câmara de segurança HIKVISION ColorVu DS-2CE10KF3T-E. HIKVISION ColorVu DS-2CE10KF3T-E 19 páginas. Bullet & turret camera
Imprimir página
9. Refer to steps 6 to 7 of 2.1.2 or 2.1.2
Mounting of Type II camera Without Junction Box
adjust the view angle.
2.2
Installation of Type III Camera
2.2.1 Ceiling Mounting without Junction Box
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
3. Attach the installation plate to the ceiling and secure
it with three PA4 × 25 screws (supplied).
Figure 2-12 Attach Installation Plate to Ceiling
4. Fit the camera onto the installation plate.
5. Turn the camera clockwise until it snaps into the
installation plate.
Figure 2-14 Snap Camera into Installation Plate
6. Connect the power cord and video cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure
below.
Pan Position
[0° to 360°]
Figure 2-11 Drill Template
Figure 2-13 Fit Camera
Tilt Position
[0° to 75°]
Rotation Position
5
Ceiling/Wall
to
[0° to 360°]