GameChanger Audio BIGSBY Manual de início rápido - Página 3

Procurar online ou descarregar pdf Manual de início rápido para Pedal de música GameChanger Audio BIGSBY. GameChanger Audio BIGSBY 8 páginas.

MAIN CONTROLS

The BIGSBY Pedal's main controls consist of three backlit rotary knobs and the SELECT button.

The knobs on the pedal's front panel have two "layers": the WHITE layer and the RED layer.

To toggle between the WHITE and RED layers - press the SELECT button.

Auto Mode rate

WET signal detune

DEPTH

The DEPTH knob ranges from 0 to 12 semitones - this means that when the knob is turned all the

way up (the knob is bright) and the foot-pedal is fully pressed down, the BIGSBY will pitch the

incoming signal down by a full octave. When it is turned all the way down (the knob is dark) there

will be no pitch shifting eﬀect at all - this may come in handy when using the pedal as an

Expression controller and no pitch shift is desired

The ﬁrst segment of the DEPTH knob is a gradual, unquantized climb from zero towards a

¼ tone interval. As you gently turn up the DEPTH control from its minimum value, you will see the

knob light up slightly - this is an indication that you are now at the ¼ tone setting, and the full

range of the foot-pedal is dedicated to a ¼ tone pitch-shift. By setting the DEPTH knob between

the zero and ¼ tone values, you can access minimal pitch-shift values, even lower than ⅛

tone.

The rest of the DEPTH knob is quantized to semitones; you will see it ﬂash once to indicate each

new semitone. We encourage you to use your ears to set the pedal's desired range.

Alternatively, you can use MIDI to make quick changes to the knob values (see pages 6, 7).

BLEND

The BLEND knob adjusts the amount of DRY (unpitched) signal sent to the BIGSBY Pedal's output.

When the knob is turned all the way down (the knob is dark), the BIGSBY Pedal's output is fully

WET (pitched signal). This setting recreates the sound of a classic tremolo system.

By gradually combining the WET and DRY signals, the BIGSBY Pedal can be used to produce

nuanced chorus or harmonizer eﬀects, depending on the DEPTH of the pitch-shift.

When BLEND is turned all the way up the volume levels of the WET and DRY signals are equal.

amount

DRY signal mix

WET signal tone

(see pages 5, 6).

Foot-pedal

down-shift depth

Foot-pedal

up-shift depth

of a