AirFiciency CF60A Instruções - Página 2
Procurar online ou descarregar pdf Instruções para Ventilador AirFiciency CF60A. AirFiciency CF60A 4 páginas. Ul507 listed ceiling fan
Imprimir página• Phillips head screwdriver
• Adjustable crescent wrench
• Carefully remove fan and parts from carton and check for shipping damage
• Check parts list against carton contents
(1) Pre-assembled fan without blades
(3) Blades with brackets attached
(6) Each – bolts, flat washers and rubber washers
(attached to motor housing)
Assemble nut, lock
washer and flat
washer onto the
J-hook mounting
bolt as shown below.
(do not replace J-hook
mounting bolt with a
lag bolt.)
flat washer
lock washer
nut
J-hook
mounting
bolt
Loosen set screw on top bell and
slide top bell down to expose top
of down rod.
top bell
set screw
down rod
Tools and Supplies
• Grounded metal outlet box with single GFCI protected receptacle
• Drill and drill bits
Unpacking
Parts List
Mounting J-Hooks
Using a drill and drill bit, drill a hole thru joist.
Insert J-hook mounting bolt with assembled
hardware into hole and secure with flat
washer, lock washer and nut as shown below.
Fully secure J-hook mounting bolt to joist by
snugging top and bottom nut.
nut
lock washer
flat washer
Preparing to Hang Fan
Inspect the hanging and installation components to ensure that there
is no shipping damage.
Check that power cord is
free from cuts or abrasions.
Check that support bracket
and rubber grommet are secure.
Check that BOTH cable locks
on safety cable are tight.
(1) J-hook mounting bolt
(2) Each – lock washers, flat washers and nuts
(1) J-hook secondary support bolt
(2) Cable locks
1½" from installed J-hook mounting
bolt, drill a small pilot hole for
mounting the J-hook secondary bolt.
Using pilot hole as your guide, install
J-hook secondary bolt for secure
installation ensuring all bolt threads
are fully engaged.
joist
secondary
power cord
safety cable
J-hook
bolt
1½"
cable
locks
rubber
grommet
support
bracket