Adexa YSD-1AD Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Forno Adexa YSD-1AD. Adexa YSD-1AD 11 páginas. Electric convection oven

 5 stages can be programmed in maximum. Repeat the above steps to set the rest of

stages if required. If no program is required for the rest of stages, set time = 0 and

press "Set" for each until stage 5 is set

 The program for Multi-Stage Cooking Mode (M) is now ready to use

Operation – Program Mode (P) / Multi-Stage Cooking Mode (M)

 Ensure the Convection Oven is plugged in

 Press "Power" button to turn on

 The oven is in "P" mode and "Convection" is selected by default. If no instruction is

given, the oven will begin to keep warm at 65° C

 Press "P/M" button to switch from Program Mode to Multi-Stage Cooking Mode if

required

 Press "Grill" button to switch from Convection to Grill if required

 Press one of the set programs "1-5", then press "Start/Stop" to begin

 The oven will start to preheat & "pr-h" will be shown on screen

 When preheat is finished, the screen will show "food". Open the door and place

food on the trays directly or with food container, then close the door tightly

Note: the oven will stop to heat if the door is not closed tightly

 For Program Mode (P): The oven will start to cook as the time set for individual

program selected

For Multi-Stage Cooking Mode (M): The oven will start to cook as the time set for

all programs stored for Multi-Stage Cooking in sequence order e.g. if "2" is selected

in M mode, the oven will process programs "2","3","4" and "5"

 When time is up, buzzer beeps and the screen shows "end". The food is now ready

for taken out. At the same time, the oven will begin to keep warm at 65° C

Caution: Be careful of hot air when the door is opened. Always use

heat-resisted gloves to take out the food.

 Internal light can be switched on before or during the cooking process by pressing

the "Light" button. It will turn off automatically in 30s

 Press "Steam" button during the cooking process for water spraying. It works only

when the oven temperature is above 130° C

Note: There is a re-set button on the rear of the unit. The unit will stop working when

temperature is too high. Press the re-set button to resume normal operation once the

oven is cool down.