agui OKATT DNP16-01 Manual de instalação e utilização - Página 4

Procurar online ou descarregar pdf Manual de instalação e utilização para Sistemas de elevação agui OKATT DNP16-01. agui OKATT DNP16-01 9 páginas. Pivoting buffer support

Imprimir página

DNP16-01

By: E. Irazu.

Reviewed by: J. Fernández

Then proceed as follows:



Regulation of lateral supports.



Marking and drilling of fixture points.



Plumbing and fixing the buffer support.



Positioning and assembly of pulleys and cables.



Connecting the contacts.



Checking operation.

Once all checks and tests are complete, proceed with the mounting of the buffer support. First mount the two

lateral supports under either side of the main unit. This will be used as support during assembly and to adjust

how the plate lies against the buffer. The image shows the assembly position for the supports.



Regulation of lateral supports:

It is very important that when the buffer support is not activated and the buffer is not compressed, the plate

sits at the highest point of the guide rails.

This requires the lateral supports to be positioned correctly:

Place the buffer under the plate

Move the plate to the highest point on the guide rails.

Loosen the screws on the lateral supports.

Move the supports until they touch the floor of the pit.

MANUAL FOR INSTALLATION AND USE

DNP16-01. PIVOTING BUFFER SUPPORT

Horizontal plate

Lateral supports touching the ground

BRAND PRODUCT

DEPARTMENT

Adjust the lateral supports so that the

plate rests on the buffer and the

entire compression slot is underneath

it, so that during buffer compression

the plate will move in line with it.

Rev:2