Bristan GLR WMBF C Manual de instruções de instalação - Página 11

Procurar online ou descarregar pdf Manual de instruções de instalação para Produto de canalização Bristan GLR WMBF C. Bristan GLR WMBF C 16 páginas. Glorious tap range

Imprimir página

Installation Cont.

Wall Mounted Basin Mixer / Bath Filler

1. Decide on the final position of the basin

mixer/ bath filler. Install suitable battons into

the wall cavity if required to support the tap

body.

2. Plumb the hot and cold water supply pipes to

the required position.

3. Secure mixer body using the screws and wall

plugs supplied.

4. Attach the supply pipework to the hot and

cold inlets (hot on the left and cold on the right

when viewed from the front) ensuring the olive

is fitted to the copper pipe work. Tighten the

compression nut to secure the pipework and

create a water tight seal.

Note: Before finishing the wall surface turn on

both water supplies to check for any leaking

connections.

5. Finish the wall surface.

Note, it is important that a sufficient amount

of the spout connecting tube and valves are left

exposed to allow the spout and valve shrouds to

connect.

6. Push the valve shroud onto the valve and

secure by tightening the grub screw.

7. Attach the spout to the concealing plinth

using the screws supplied.

8. Push the spout onto the spout connecting

tube ensuring the o-rings on the spout

connecting tube have located inside the spout.

Tighten the grub screw to secure the spout in

place.

9. Push the handles onto the valve spindles and

tighten the grub screws.

10. Turn on both water supplies and operate the

handles letting the water flow for a few minutes

to flush the system.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.