Bristan Hourglass HOU BSM C Instruções de instalação e manual do utilizador - Página 10
Procurar online ou descarregar pdf Instruções de instalação e manual do utilizador para Produto de canalização Bristan Hourglass HOU BSM C. Bristan Hourglass HOU BSM C 20 páginas.
Imprimir páginaInstallation Continued
Bath Shower Mixer
1.
Identify all components are present prior to starting installation
2.
Position O-Rings (11) in the groove on the underside of the mixer body (9) and
install to the bath
3.
Using the washers (12) and the backnuts (13), secure the mixer body (9) to the
bath by tightening the backnuts (13) onto the pre-fitted threaded tails. A
suitable spanner may be required to fully tighten the backnuts (13)
4.
Connect the hot & cold water supplies using ¾" tap connectors (not supplied)
5.
Fit the shower hose (15) to the hose outlet using the small washer and the
handset (16) to the hose using the small washer
6.
Fit the wall bracket (not shown) to the wall using the fixings supplied, ensuring
the handset (16) and hose (15) reach it.
7.
Turn the handles in both directions, letting the water flow for a few minutes to
check all joints and connections
8.
To switch from bath to shower mode, pull the diverter knob (7) up, to revert
back to bath filling mode, push the diverter knob back down
1. Grub Screw Cap
2. Grub Screw
3. Handle
4. Shroud
5. O-Ring
6. Spline Adaptor
7. Diverter Knob
8. Ceramic Disc Valve
10
x2
9. Mixer Body
x2
10. Anti-Splash
x2
11. O-Ring
x2
12. Rubber Washer
x2
13. Metal Backnut
x2
14. Diverter Mechanism
x1
15. Hose
x2
16. Handset
x1
x1
x2
x2
x2
x1
x1
x1