Bristan IRBS4-BN Instruções de instalação e manual do utilizador - Página 8
Procurar online ou descarregar pdf Instruções de instalação e manual do utilizador para Produto de canalização Bristan IRBS4-BN. Bristan IRBS4-BN 16 páginas. Infrared temperature control automatic basin spout
Também para Bristan IRBS4-BN: Instruções de instalação e manual do utilizador (20 páginas)
Imprimir página
Installation - Electrical Connections
Connect Power Supply Cable
Before starting any electrical
work ensure the power supply
is isolated.
Wire the electrical power cable into a
switched fused spur off the ring main.
The blue wire should be wired to the
neutral connection and the brown
wire should be connected to the live
connection.
Note: For full electrical requirements see
'Electrical Connections' in 'Installation
Requirements' section.
Important: This product must be
permanently connected to the fixed
wiring of the mains supply using the
factory supplied power cable.
Power/ Sensor Cable Connection
Connect the transformer cable to the
sensor and battery box connectors.
Attach The Wall Bracket
Attach the wall bracket to the wall by
using screws and wall plugs provided.
Place the battery box into the battery
housing bracket and attach to the wall
bracket.
Setting Up The Sensor
Once the tap has been installed,
disconnect the sensor connector from
the transformer cable for 30 seconds,
Reconnect and put the hand at the
required position in front of the sensor
until the light stops flashing.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
8
Transformer cable
Battery Box
Battery Housing
Bracket
Sensor
connector
Battery box
connector
Wall Bracket
Wall Bracket