Bristan K 1/2 C Instruções de instalação e manual do utilizador - Página 16

Procurar online ou descarregar pdf Instruções de instalação e manual do utilizador para Produto de canalização Bristan K 1/2 C. Bristan K 1/2 C 20 páginas.
Também para Bristan K 1/2 C: Instruções de instalação e manual do utilizador (5 páginas)

Imprimir página

Maintenance cont.

Cleaning the Valves

We advise that your fitting is regularly

serviced in hard water areas to maintain

optimum performance (see map of Hard

Water Regions in the UK on page 17.

If your fitting begins to leak the following

should be carried out;

Isolate both hot and cold water supplies to

the tap by either:

• Turning the water supply off at the mains

stopcock or

• Turning off the isolation valves to the tap.

1. Prise the Indice from the handle.

2. Loosen the handle screw and pull the

handle from the valve spindle.

3. Unscrew the shroud from the valve.

4. Using a suitable spanner remove the valve

from the tap body.

5. Clean the valve and the seating inside the

tap body.

6. If necessary replace the valve

Please visit www.bristan.com/sparesfinder in

order to find spare parts for this product.

7. Replace the valve into the tap body and

tighten fully using a suitable spanner.

8. Screw the shroud onto the valve.

9. Push the handle onto the valve spindle.

10. Tighten the handle screw and push-fit the

Indice back into position.

Indice

Handle Screw

Handle

Shroud

Valve

Tap Body