Bristan K 1/2 C Instruções de instalação e manual do utilizador - Página 8

Procurar online ou descarregar pdf Instruções de instalação e manual do utilizador para Produto de canalização Bristan K 1/2 C. Bristan K 1/2 C 20 páginas.
Também para Bristan K 1/2 C: Instruções de instalação e manual do utilizador (5 páginas)

Imprimir página

Installation cont.

Basin Mixer

1. Identify all components are present prior to starting installation using the diagram

overleaf.

2. Fit the mixer body (6) to the basin.

3. Fit the washer (7) between the basin mixer and the top of the basin, and 'C' shaped

rubber washer (8) and the 'C' shaped metal washer (9) to the underside of the basin and

screw the fixing stud (10) into the bottom of the mixer body (6). Tighten the fixing nut (11)

on to the fixing stud (10) to secure the basin mixer in place.

4. Fit the copper connecting pipes (12) to the mixer (DO NOT OVERTIGHTEN)

the hot and cold water supplies.

5. Fit the pop up waste (14) to the basin ensuring a rubber washer is fitted between the

basin and the waste. Use a pure silicon sealant where necessary. Place the other rubber

washer under the basin and tighten the bottom of the waste to secure in place. Connect

the drainage pipe (not supplied) to the waste.

6. Fix both pop up rods in position, the vertical rod slides down through the hole in the back

of the mixer body.

7. In order to fill the basin, pull the pop up waste knob (15) up. To release the water push

the pop up waste knob (15) back down.

8. Turn on both water supplies and turn the handles into the open position, letting the water

flow for a few minutes to check all joints and connections for any leaks.

Indice

Handle Screw

Handle

Shroud

Valve

Mixer Body

Washer

(DO NOT OVERTIGHTEN) and connect

(DO NOT OVERTIGHTEN)

'C' Shaped Rubber Washer

'C' Shaped Metal Washer

10.

Fixing Stud

11.

Fixing Nut

12.

Copper Connecting Pipes

13.

Horizontal waste rod

14.

Pop up Waste

15.

Pop up waste knob