decakila KUJB006M Manual - Página 10

Procurar online ou descarregar pdf Manual para Liquidificador decakila KUJB006M. decakila KUJB006M 12 páginas. Table blender

CHOPPING OPERATION

Place the prepared chopping food into the bowl.The food
must be cut into small size firstly(such as 2cm*2cm*6cm for
beef).
NOTE: The appliance allows you to chop the maximum
quantity of beef or meat is 150g. Select the highest speed
and operate for 60s.
• For best circulation of food that are to be blended with some
liquid, pour the liquid into the jar first, then add solids.
• Some of the tasks that cannot be performed efficiently with
a blender are: beating egg whites, whipping cream, mashing
potatoes, grinding meat, mixing dough, extracting juice from
fruit and vegetable
• The following items should never be placed in the unit as
they may cause damage: bones, large pieces of solid, frozen
food, or tough foods such as turnips.
• To crush ice, Not more than 180g ice cubes.

CARE AND CLEANING

This product contains no user serviceable parts. Refer
service to qualified service personnel.
• Before cleaning, unplug the blender.
• Always wash immediately after use for easier cleaning.
Don't let food dry on the jar assembly as this will make
cleaning difficult.
• Pour a little warm soapy water into the jar and turn the
knob to P position for a few seconds. And then empty the
jar.
• Dismantle all detachable parts. Lift the jar assembly off
the motor unit, To detach the blade assembly by turning it
clockwise from
the jar base bottom , and remove the seal ring 2 and blade
assembly (see fig.8). In addition, detach the jar cover seal
ring 1 from the jar cover.
• Rinse the measure cup, lid, seal ring 1, jar, seal ring 2 and
blade assembly by hands or in a dishwasher and then dry.
They are dishwasher safe components, but the temperature
setting shall not exceed 70 ℃ .
• Brush the blade clean using warm soapy water, then rinse
thoroughly under the tap. Don't touch the sharp blades,
handle carefully. Leave to dry upside down away from
children.
• Wipe the motor unit with a damp cloth and dry thoroughly.
Remove the stubborn spots by rubbing with non-abrasive
cleaner. If liquids spill into the motor unit; first unplug the
unit, then wipe with a damp cloth and dry thoroughly.
08