Bristan Quest Easyfit Instruções de instalação e manual do utilizador - Página 8

Procurar online ou descarregar pdf Instruções de instalação e manual do utilizador para Produto de canalização Bristan Quest Easyfit. Bristan Quest Easyfit 13 páginas. Kitchen sink mixer

Imprimir página
Bristan Quest Easyfit Instruções de instalação e manual do utilizador
BRISTAN
Installation Cont.
3. Attach flexible connecting pipes
.
&
Important: Before connecting the flexible connecting
pipes, please refer to the specific installation
requirements on page
5.
Carefully screw the
"flexible
connecting
pipes·
into the
'push-fit
connectors·
.
Fit the
isolation valves [supplied] to the flexible connection pipes
and turn to the 'closed' position as shown on page
5.
Note
:
A flexible connecting pipe can be fed up through
the hot connector hole and then screwed on if required
.
&
Important
:
Only tighten the flexible connecting pipe by
hand
.
Do not overtighten
.
Connect the isolation valves/flexible
connecting pipes to the household water supply pipes
.
4. Cover cap
If required place the cover cap over the push-fit connector
until the tap body is ready to be fitted
.
5.
Fit the tap body
Flex
ible
conn ectin
g
pi
pes
Cover
cap
Remove the cover cap and place the plinth over the push-fit
connector.
Grease the push-fit
connector using the sachet of grease provided
.
Push-fit the tap body onto the
connector.
Align the body and tighten the grub screw at the rear of the body, using the long end of the
2.5mm hexagonal key as shown below until finger tight
.
Remove the hexagonal key and
insert the short end into the grub screw and tighten an extra¾ to 1 complete turn more to
ensure the tap body is securely tightened to the push-fit
connector.
&
Important
:
The fitting must be securely attached to the base
.
hexago
nal
key
*
Tap body may
vary to the one
shown here
Turn on the mains water supply and open the isolating valves using a suitable flat blade
screwdriver.
[See page 05]
Operation
Turning of the cross head handles will turn on/off and increase/decrease the flow of
water.
The swivel spout also allows for
various
positioning
.
08