Bristan FLT 3HBAS C Manual de instruções de instalação - Página 12

Procurar online ou descarregar pdf Manual de instruções de instalação para Cozinha & amp; Acessórios de casa de banho Bristan FLT 3HBAS C. Bristan FLT 3HBAS C 16 páginas. Flute tap range

Imprimir página

Maintenance

General Cleaning
Your fitting has a high quality finish and
should be treated with care to preserve the
visible surfaces. All surfaces will wear if not
cleaned correctly, the only safe way to clean
your mixer is to wipe with a soft damp cloth.
Stains can be removed using washing up
liquid. All bath cleaning powders and liquids
will damage the surface of your fitting, even
the non-scratch cleaners.
Note: Never use abrasive detergents or
disinfectants or those containing alcohol,
hydrochloric acid or phosphoric acid.
Cartridge / Valve Maintenance.
Before carrying out any maintenance, turn off
the both water supply or close any isolating
valves.
Prise out the handle cap, loosen the grub
screw using a 2.5 mm hexagonal key and
remove the handle.
Cartridge
Unscrew the locking shroud and cartridge
retaining nut and pull the cartridge out from
the body.
Clean the cartridge thoroughly under cold
water to remove any build up of limescale or
debris.
Replace the cartridge into the body and
tighten the retaining nut to secure in place.
Screw the shroud onto the retaining nut and
push the handle onto the cartridge. Tighten
the grub screw and push fit the cap.
Valve
Using the correct size spanner remove
the valve. Wash the valve with clean water
and make sure that any debris has been
removed. Dry and lightly grease the seal (only
use silicone grease), replace the valve and
the handle. Tighten the grub screw and push
fit the cap.
12
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
Locking Shroud
Handle
Grub Screw
Cap
Grub Screw
Handle
Important: Tighten the retaining nut/
valve with the correct size spanner
and apply appropriate force/torque.
Do not overtighten.
Shroud
Retaining
Nut
2.5 mm
hexagonal key
Cap
2.5 mm
hexagonal key
Spline Adaptor
Valve
Shroud