Adey ElectroScale Instalação e manutenção - Página 3

Procurar online ou descarregar pdf Instalação e manutenção para Produto de canalização Adey ElectroScale. Adey ElectroScale 4 páginas. Scale reducer-15mm and 22mm compression

Imprimir página
ElectroScale
®
Whole House Protection against limescale
ElectroScale has been designed to prevent limescale build-up in homes and small commercial properties.
This product is a non-polluting electrolytic water conditioner. The electrolytic cell alters the crystal structure
of the limescale as it passes through making it less likely to stick to pipes or other services. ElectroScale
does not require an electrical power supply.
Installation meets the requirements of Part L of the Building Regulations. This states that provision
must be made to treat the feed water to water heaters and hot water circuit of combination boilers to
reduce the rate of limescale accumulation.
Technical Specification
Connection
Material
Maximum operating
temperature
Minimum operating
temperature
Maximum working pressure
Length (mm)
Diameter (mm)
Weight (g)
Pressure drop
Warranty
For the most up to date version of the MagnaScale Installation instructions visit adey.com.
Installation
IMPORTANT:
Please read before installation of ElectroScale Scale Reducer.
ElectroScale can be installed on both horizontal and vertical pipework.
Where possible do not reuse old pipes.
Only WRAS approved jointing compounds should be used.
To maintain earth continuity in accordance with current IEE regulations, when required a suitable earth
bonding cable should be fitted to the pipework to bypass the product. Refer to NICEIC 17th edition for
more information.
This product must be fitted in accordance with WRAS installation requirements and notes, which can
be found on the WRAS website https://www.wras.co.uk/ under approval number 1610300.
It is recommended that a pressure reducing valve is fitted to the incoming water mains to maintain a
constant water pressure at all times.
ElectroScale 22mm Compression
22mm copper compression to
BS EN 1254-2
External copper body, end caps low lead brass, internal zinc anode
Cold feed only
3˚C
10 bar
206
38
900
36.01/min = 67mbar
10 years
ElectroScale 15mm Compression
15mm copper compression to
BS EN 1254-2
201
38
874
25.01/min = 77mbar