jakar HAMMER OLD Manual de início rápido - Página 2

Procurar online ou descarregar pdf Manual de início rápido para Máquinas de jogos de arcada jakar HAMMER OLD. jakar HAMMER OLD 3 páginas.

The „HAMMER" strength machine is the amusement device designed for play in bars, clubs, cinemas,

festivities, amusement parks, etc. The machine is profit-making device not paying the money prizes.

The machine is designed and made from state of the art materials and parts available on the market.

Components of the device are compliant with the safety standards, what is confirmed by CE certificate.

To enter SETUP turn-off the machine an holding SETUP key on the MAIN board turn it back on.

Switching between the SETUP items is realised by the following keys:

Confirmation of the selected option - SETUP button

Browsing the options

1 - 6. Setting credits.

In option 1-3 set number of credits which shall be granted by the machine after a coin is inserted

on the first, second and third coinbox channel. These are double options. The number of games

(left display) and coin value (right display) related to the value may be set.

Example: Push SETUP, when small display is blinking the credit value shall be set, i.e. to 0,5.

Confirm by pushing SETUP, then set the number of pulses related to 1. It means that inserting

two coins on this channel gives 1 credit and 2 pulses on mechanical counter.

Options 4-6 relates to banknotes. Coding is realised the same way as above.

7. Record.

In this option the machine record value in the range 10 – 999 can be changed.

For that purpose SETUP shall be pushed, then the required record value shall be set with use of

up / down button.

8. Test hardware.

Pushing appropriate buttons enables performing of the device operation test. After SETUP is

pushed the following are tested:

- matrix display

- LED horseshoe

9. Factory settings.

Pushing the SETUP button causes setting of setup options to factory settings.

Initial parameters are:

I. INTRODUCTION.

II. TECHNICAL PARAMETERS

Height

Width

Length

Total weight

Power supply

III. PARAMETERS CHANGE HAMMER - SETUP.

- Sensors (additional and plate)

238 cm

80 cm

115 cm

130 kg

220 – 240 V

- up/down button

- additional keys

- LED plate