IKEA RODULF Manual - Página 6

Procurar online ou descarregar pdf Manual para Mobiliário de interior IKEA RODULF. IKEA RODULF 25 páginas. An electro-mechanically height adjustable work-surface with control interface to adjust height up and down.
Também para IKEA RODULF: Manual (25 páginas), Manual (32 páginas), Manual (12 páginas)

Imprimir página

QUICK GUIDE

Manual reset / first use:

• Perform a reset by simultaneously

pressing the up and down buttons for

at least 8 seconds. Keep holding the

buttons and the desk will slowly move

to the lowest possible point. Reset is

complete when the desk has stopped

at the lowest point.

Follow these instructions when

adjusting desk height:

1. Make sure no objects are in the way

of the desk height adjustment range.

2. In order to run the desk up or down,

press the man oeuvre button up or

down, respectively.

Press the up button and continue to

hold until desired desktop height is

reached.

Press the down button and continue

to hold until desired desktop height is

reached.

To access full stroke

• Release the down button at the

lowest safe point and then press the

down button again for 5 seconds.

The desk will move to the mechanical

lowest height to have full stroke

access.

Simple memory

• To set memory/end positions:

• Move your desk to the level you want

to store.

• Press both buttons three times (0.5-1

second between each press).

• Then press "up" or "down" to set the

position (0.5-1 second).

• Do the same for your second stored

setting.

Collision detection

• The system is designed to avoid

possible damages to equipment due

to collision.

When desk detects a sudden

change in resistance it will stop the

movement and reverse approximately

50mm. 25mm of travel to activate in

both direction.

Safety regulations

• When the desk is run up/down, keep

the necessary safety distance to avoid

being trapped between the moving

desk top and fixed objects in the

surrounding area.

• When the desk is run up/down the

user should keep watch so that

nobody is injured or no object is

damaged. The desk top must not

bump into a fixed object in case it

overturns. Remove any office chair

before the desk is run up/down, each

time.

• The desk legs must not be altered

or reconstructed in any way. During

service and repair work of the desk,

the electrical cable must always be

disconnected from the wall socket.

• Modifications to the legs are

absolutely prohibited.

• The desk must not be used as a

hoisting device for people.