Major Manufacturing HIT-66-248 Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instruções para Fechaduras Major Manufacturing HIT-66-248. Major Manufacturing HIT-66-248 7 páginas. Template for hager series mortise lock

Imprimir página

With both clamps opened

equally, install both inside

and outside templates to the

HIT-66 clamp as shown. Do

not tighten the 10-32 screws

at this time. When all screws

have been loosely installed,

then it is ok to tighten.

Install the alignment guide to

either side of the template

set. This is used to align the

template with the mortise

pocket.

Shown is a standard mortise

pocket, we will use this as a

basis for the Hager Mortise

Lock installation.

PAGE 3