aguri Power Clean Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Máquina de lavar roupa de pressão aguri Power Clean. aguri Power Clean 2 páginas. Cordless pressure washer

Imprimir página

Power Clean

Operating instructions

Charging the battery.

Connect the charger to the battery and insert the charger

in to a standard 240V house socket.

It will take up to 240 mins to fully charge the 2.0AH

battery and up to 480 mins to fully charge the

4.0AH battery from empty, depending on the model

purchased.

Checking the battery level.

Press and hold the button on the front of the battery

to check the level of charge remaining. One red LED

and two green LEDs will be illuminated when the

battery is fully charged.

Connecting the short wand

to the long wand.

For maximum pressure, the short wand should be

connected to the long wand before the combined

sections are attached to the main body of the

pressure washer.

Insert the short wand in to the long wand. Push it

firmly in and rotate clockwise in to place. Check that

the two sections are fully connected before using the

pressure washer.

22386 Aguri A5 6pp Power Clean Guide.indd 21/08/2020 2:07 pm (80.00)

- 4-6 -

Connecting the green or red

spray nozzles.

Pull the gold metal collar backwards and insert the

green or red spray nozzle. The green nozzle will

produce an angled spray, whereas the red nozzle will

produce a single, 'laser' type spray.

Ensure that the nozzle is pushed all the way in before

releasing the collar and locking the nozzle in place.

Check that the spray nozzle is fully connected before use.

Connecting the wand to the main

body of the pressure washer.

For maximum presure, connect the combined, long and

short wand, in to the main body of the pressure washer.

Push firmly and rotate the wand clockwise in to place.

If you require less pressure, insert only the short wand

and spray nozzle directly in to the main body of the

pressure washer instead.

Check that the wand is fully connected before using the

pressure washer.

Using the soap gun.

Unscrew the top of the soap gun and fill it with a

suitable liquid detergent. Align it with the main body

of the pressure washer, push it firmly in and rotate

clockwise to lock it into place.

Once you have connected the soap gun, follow the

instructions later in this manual, explaining how to

connect the hose and operate the pressure washer.

Always check that the soap gun is fully connected

before use.

Connecting a hose.

Connect the short hose and filter provided or your own

hose pipe to the main body of the pressure washer.

Push the female adaptor firmly on to the male receptor

until you feel it 'click' in to place.

Using the short hose and filter.

If you are using the short hose and filter supplied,

submerge the filter end in to a bucket of water.

If the filter floats back to the top, lightly shake it while it

is still submerged to release any pockets of air that are

trapped in the filter.

Please note that it may take up to 20 seconds for the

water to travel the length of the hose and reach the gun

after you have pulled the trigger.

Operating the pressure washer.

Once the wand or soap gun, and the hose is fully

assembled the pressure washer is ready to use.

If you have connected the washer to your own hose,

ensure the hose is safely connected to the tap and turn

the water on.

(Please note that the gun will begin to emit water

immediately, so ensure that the gun is not pointing at,

or near anything that you do not wish to get wet)

If you are using the short hose included

with the pressure washer, ensure that the

filter end is fully submerged in to whatever

water source you are using.

Next, pull and hold the orange power

trigger. If you are connected to a normal

hose with the tap 'open' the gun will emit

pressurised water almost immediately.

If you are using the short hose and filter

supplied, submerged in something like

a bucket of water, it may take about 20

seconds for the pressurised water to reach

the gun and start to flow.

Release the orange power trigger

whenever you want to stop the water flow.

Using the soap gun

If you have the soap gun attached, carefully aim the pressure washer at the object you want to cover in soap

and pull the trigger. The pressure washer will automatically emit a mixture of soap and water. Use the soap gun

to cover the object you want to wash, such as a bike or vehicle, then clean as normal using a suitable brush or

sponge. Next, remove the soap gun from the main body of the pressure washer, re-attach the wand and rinse

off the soap with clean water.

Release the orange power trigger whenever you want to stop the flow of soap and water.