Green Brook Orion Range ODPS300 Instruções
Procurar online ou descarregar pdf Instruções para Sensores de segurança Green Brook Orion Range ODPS300. Green Brook Orion Range ODPS300 2 páginas. Infra-red presence detector
Imprimir página•
Please read these instructions carefully before installation and keep safe for future
reference.
IMPORTANT
This product should be installed by a competent person and in accordance with
the current IET Wiring Regulations and Building Regulations.
If in doubt,consult a qualified electrician.
•
Always turn off the mains supply before commencing work.
As the detector responds to changes in temperature, avoid the following situations:-
•
Avoid pointing the detector towards objects with highly reflective surfaces, such as
mirrors etc.
•
Avoid mounting the detector near heat sources, such as heating vents, air conditioning
units, lights etc.
•
Avoid pointing the detector towards objects that may move in the wind, such as
curtains, tall plants etc.
Switch the mains supply OFF first to prevent electric shock.
1.
Remove cover by levering off with a small flat bladed screwdriver.
2.
Connect the mains in and load out
wires according to Dia:1.
Dia:1
Note:
Please refer to Data Sheet on the GreenBrook website -
www.greenbrook.co.uk for wiring sensor in parallel.
'Orion Range'
Infra-red Presence Detector
Model: ODPS300
Important Safety Instructions
FIELD OF DETECTION
INSTALLATION
3.
Secure the sensor to the ceiling using
two wood screws (ensure there is no
wiring/gas/water services directly
behind the screws) refer to Dia:2.
Dia:2