Centsys Photon SMART Manual de instalação - Página 4

Procurar online ou descarregar pdf Manual de instalação para Sensores de segurança Centsys Photon SMART. Centsys Photon SMART 8 páginas.

Front

Cover

To expose the mounting holes, the PCB must be removed

from the enclosure. Press the red plastic lever located at

the top of the enclosure as shown in Figure 4.

Store the PCB safely to prevent damage.

Red

Plastic

Lever

7.3 Mounting

Mark the mounting position of the receiver for a single or

double fastener.

For masonry mounting, use a 5mm masonry

drill bit.

For mounting to steel tubing, use a 2.3mm steel

drill bit.

Wall

Plugs

Back Cover

Mount the base of the reciever using the supplied

hardware. Ensure that the rubber "O" ring is used to seal

the Photon SMART enclosure against insect ingress.

For double mounting screws, knock out the thin plastic

film. Double mounting screws are recommended to better

locate the Photon SMART PE beams and prevent them

from twisting.

Bottom

Front

Cover

FIGURE 3

FIGURE 4

O-Ring

Screw

Break-through

O-Ring

Screw

FIGURE 5

hole