Deckma GAS 3000 Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Sistema de segurança Deckma GAS 3000. Deckma GAS 3000 10 páginas. General alarm system

MANUAL SIGNAL SEQUENCES

All control elements are protected against unintentional activation.

To enable the control elements press the key button „UNLOCK"

which will then change its colour to orange.

By pressing the

so on can be given. The respective output remains activated as long as the

pushbutton is pressed.

Manually given signals interrupt an automatic signalling which might have

been active. When the manual signalling has been finished the automatic

signalling must be switched on again if this is still required.

Exception:

If the „General Alarm" was activated by the external inputs (In1 or In2 or In3)

manually given signals will interrupt the general alarm sequence but it will

return 20 seconds after the manual signalling has been ceased if the external

input is still active.

ADJUSTMENT OF THE PANEL LIGHTING

To adapt the panel lights to the prevailing lighting conditions on board

the panel's lighting intensity can be adjusted.

To enable the control elements press the key button „UNLOCK"

which will then change its colour to orange.

Now the lighting can be adjusted by pressing the „UP" or "DOWN" buttons

repeatedly. This will increase or decrease the panel's lighting intensity in steps

of 10%.

This setting will remain even after the power has been removed.

ERRORS

Internal errors of the unit, as well as power supply failure are indicated at plug

JP2. The contact remains closed during normal operations or standby and

opens in case of a failure.

Tel.: +49 (0)4105 / 65 60 – 0

E-mail:

button any signal sequences like e.g. Morse signals and

* DECKMA GmbH *

Fax: +49 (0)4105 / 65 60 – 25

Internet: