IKEA 804.132.33 Manual - Página 18

Procurar online ou descarregar pdf Manual para Forno IKEA 804.132.33. IKEA 804.132.33 40 páginas.
Também para IKEA 804.132.33: Manual (44 páginas)

Imprimir página

ENGLISH

Heat-up indicator

When you turn on a heating function, the

bar on the display comes on. The bar shows

that the temperature increases. When

temperature is reached the buzzer sounds 3

times and the bar flashes and then

disappears.

Fast Heat Up

This function decreases the heat-up time.

Do not put food in the oven when

the Fast heat up function works.

Clock functions

Clock functions table

Clock function

Minute

Minder

Duration

End Time

If you set the time for a clock function, the

time starts to count down after 5 seconds.

If you use the clock functions:

Duration, End Time, the oven

turns off the heating elements

after 90 % of the set time. The

oven uses the residual heat to

continue the cooking process

until the time ends (3 - 20

minutes).

Application

To set a countdown

(max. 2 h 30 min). This

function has no effect

on the operation of the

oven.

Press

to turn on the

function. Use the shuttle

to set the minutes and

to start.

To set how long the

oven works (max. 23 h

59 min).

To set the switch-off

time for a heating func‐

tion (max. 23 h 59 min).

To turn on the function, hold

seconds. The heat-up indicator alternates.

This function is not available for some oven

functions.

Residual heat

When you turn off the oven, the display

shows the residual heat. You can use the

heat to keep the food warm.

Setting the clock functions

Before you use the functions:

Duration, End Time, you must set

a heating function and

temperature first. The oven turns

off automatically.

You can use the functions:

Duration and End Time at the

same time if you want to

automatically turn on and turn off

the oven on a given time later.

The functions: Duration and End

Time do not work when you use

the core temperature sensor.

1. Set a heating function.

2. Press

again and again until the

display shows the necessary clock

function and the related symbol.

3. Use the shuttle to set the necessary time.

4. Press

to confirm.

When the time ends, a signal sounds. The

oven turns off. The display shows a

message.

5. Press any symbol to stop the signal.

Heat + Hold

Conditions for the function:

• The set temperature is more than 80 °C.

• The function: Duration is set.

for 3