Major tech MT760 Manual - Página 2

Procurar online ou descarregar pdf Manual para Instrumentos de medição Major tech MT760. Major tech MT760 4 páginas. 100a ac/dc trms mini clamp meter
Também para Major tech MT760: Manual de instruções (16 páginas)

Imprimir página

Safety

International Safety Symbols

This symbol, adjacent to another symbol or terminal, indicates the user must refer to

the manual for further information.

This symbol, adjacent to a terminal, indicates that, under normal use, hazardous

voltages may be present

Double insulation

SAFETY NOTES

•

Do not exceed the maximum allowable input range of any function

•

Do not apply voltage to meter when resistance function is selected.

•

Set the function switch OFF when the meter is not in use.

WARNINGS

•

Set function switch to the appropriate position before measuring.

•

When measuring volts do not switch to current/resistance modes.

•

When changing ranges using the selector switch always disconnect the test leads from the

circuit under test.

•

Do not exceed the maximum rated input limits.

CAUTIONS

Improper use of this meter can cause damage, shock, injury or death. Read and understand

this user manual before operating the meter.

Always remove the test leads before replacing the battery.

Inspect the condition of the test leads and the meter itself for any damage before operating the

meter. Repair or replace any damage before use.

Use great care when making measurements if the voltages are greater than 25VAC rms or

35VDC. These voltages are considered a shock hazard.

Remove the battery if the meter is to be stored for long periods.

Always discharge capacitors and remove power from the device under test before performing

Diode, Resistance or Continuity tests.

• Voltage checks on electrical outlets can be difficult and misleading because of the uncertainty

of connection to the recessed electrical contacts. Other means should be used to ensure that

the terminals are not "live".

• If the equipment is used in a manner not specified by the manufacturer, the protection

provided by the equipment may be impaired.

Function

A AC, VDC

V DC, V AC

Resistance, Continuity Test

Input Limits

Maximum Input

200A (PEAK 282.8A)

600V DC/AC

Meter Description

1. Current clamp & Non-contact AC voltage detector probe tip

2. F lashlight

3. Non-contact AC voltage(NCV) indicator light

4. F lashlight on/off button

5. Rotary Function swith

6. Clamp trigger

7. LCD display

8. Select Peek hold, MAX/MIN Hold, DCA Zero,DC/ACV function button

Peak Hold function (only ACA range)

DCA Zero (only DCA range)

MAX/MIN Hold function (Use to DCA,DCV,ACV, Resistance range )

DC/ACV (select DC Vor ACV )

9. Data Hold & Backlight button

10. COM input jack

11. V

jack

12. Battery Cover