KitchenAid KEC Manual de instruções de instalação - Página 7
Procurar online ou descarregar pdf Manual de instruções de instalação para Placa de fogão KitchenAid KEC. KitchenAid KEC 16 páginas. Electric cooktop
Também para KitchenAid KEC: Manual de instruções de instalação (16 páginas), Manual de instruções de instalação (10 páginas)
Imprimir página
- 1. Table of Contents
- 2. Installation Requirements
- 2. Electrical Requirements
- 3. Installation Instructions
- 3. Install Cooktop
- 3. Attach Cooktop to Countertop
- 4. Si_Curiti_ de la Table de Cuisson
- 5. Exlgences D'INSTALLATION
- 6. Instructions D'installation
- 7. Fixation de la Table de Cuisson Au Plan de Travail
3-Wire Cable from Power Supply to 4-Wire Cable from
Cooktop
IMPORTANT: Use the 3-wire cable from power supply where
local codes permit connecting the frame-ground
conductor
to
the neutral (white) junction box wire:
A
E
F
G
H
C
D
A. 3-wire cable from power
supply
B. Red wires
C. White and green or bare
ground wires (from cooktop)
D. 4-wire cable from cooktop
E. Junction box
F. White wire (from power
supply)
G. UL listed wire connector
H. Black wires
I. UL listed or CSA approved
conduit connector
1. Disconnect
power.
2. Remove junction box cover if present.
3. Connect the flexible, cable conduit from the cooktop to the
junction box using UL listed or CSA approved conduit
connector.
4. Tighten screws on conduit connector, if present.
5. Connect the two black wires together using the UL listed wire
connectors.
6. Connect the two red wires together using the UL listed wire
connectors.
7. Connect the green or bare and white cooktop cable wires to
the white (neutral) wire in the junction box using the UL listed
wire connectors.
8. Install junction box cover.
9. Reconnect power.
4-Wire Cable from Power Supply to 3-Wire Cable from
Cooktop
IMPORTANT:
Use the 4-wire cable from power supply where
local codes do not permit connecting the frame-ground
conductor to the neutral (white) junction box wire:
I
A
D
A. 4-wire cable from power
supply
B. Red wires
C. Green or bare ground wire
(from cooktop)
D. 3-wire cable from cooktop
E. Junction box
...........
E
_"T_/
F
F. White wire (from power supply)
G. UL listed wire connector
H. Black wires
I. UL listed or CSA approved
conduit connector
1. Disconnect
power
2. Remove junction box cover if present.
3. Connect the flexible cable conduit from the cooktop to the
junction box using a UL listed or CSA approved conduit
connector.
4. Tighten screws on conduit connector,
if present.
5. Connect the two black wires together using the UL listed wire
connectors.
6. Connect the two red wires together using the UL listed wire
connectors.
7. Connect the green or bare ground wire from the cooktop
cable to the green or bare ground wire (in the junction box)
using the UL listed wire connectors.
8. Put a UL listed wire connector
on the end of the white wire.
NOTE: Do not connect the bare ground wire to the neutral
(white) wire in the junction box.
9. Install junction box cover.
10. Reconnect power.