Major tech MT245 Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Equipamento de teste Major tech MT245. Major tech MT245 20 páginas. Car battery tester

4. Power-provided via cable from car battery

5. Dimensions: LxWxH: 784mm x 355mm x 210mm

6. Weight: 293g

2.3. Accessories Included

1. User's Manual

2. USB Cable -- Provides link to unit and computer for printing

Testing Out-of-Vehicle:

Clean the battery posts or side terminals with a wire brush. For testing

side-post batteries, install and tighten the lead terminal stud adapters.

Failure to properly install the stud adapters, or using stud

adapters that are dirty or worn, may result in false test results.

Do not use steel bolts.

Testing In-Vehicle:

Turn off the vehicle and all accessory loads. Testing with the ignition

switch on or vehicle loads on may cause damage.

WARNING: Battery terminals, terminals and related accessories

contain lead and lead compounds, which are known to cause cancer,

birth defects or other reproductive hazards. Wash hands after

treatment.

1. Clip the red and black clips of the tester onto the battery to be tested,

the red is positive and the black is negative, and the tester display

shows the boot interface. If the measured battery voltage is lower

than 8.0V, the test cannot be

performed normally. Press the

'ENTER' button to continue.

2. According to the prompts of

the tester, press the up and

down keys to select:

The main menu contains six

function options: battery

power, waveform monitoring,

playback, printing, settings

and about.