IKEA IBS550PXB00 Manual de instruções de instalação - Página 5

Procurar online ou descarregar pdf Manual de instruções de instalação para Forno IKEA IBS550PXB00. IKEA IBS550PXB00 12 páginas. 30" (76.2 cm) electric single built-in oven
Também para IKEA IBS550PXB00: Manual de utilização e cuidados (32 páginas)

IKEA IBS550PXB00 Manual de instruções de instalação
Electrical
Connection
Options Chart
If your home has:
4-wire
Go to section:
4-wire Cable from Home
Power Supply
3-wire
3-wire Cable from Home
__
Power Supply
!
4-Wire Cable from Home Power Supply
IMPORTANT:
Use the 4-wire cable from home power supply in
the U.S. where local codes do not allow grounding through
neutral, New Branch circuit installations (1996 NEC), mobile
homes and recreational vehicles, new construction
and in
Canada.
A
A. Cable from home power supply
B. Black wires
C. Red wires
D. 4-wire flexible conduit from
oven
E. Junction box
F. White wires
G. UL fisted wire connectors
H. Green (or bare) ground wires
I. UL fisted or CSA approved
conduit connector
1. Connect the 2 black wires (B) together using a UL listed wire
connector.
2. Connect the 2 red wires (C) together using a UL listed wire
connector.
3. Untwist white wire from green (or bare) ground wire coming
from the oven.
4. Connect the 2 white wires (F) together using a UL listed wire
connector.
5. Connect the green (or bare) ground wire (H) from the oven
cable to the green (or bare) ground wire (in the junction box)
using a UL listed wire connector.
6. Install junction box cover.
3-Wire Cable from Home Power Supply - U.S. Only
IMPORTANT:
Use the 3-wire cable from home power supply
where local codes permit a 3-wire connection.
A
B
D
E
F
G
A. Cable from home power supply
B. Junction box
C. Black wires
D. White wires
E. Green (or bare) ground wire
(from oven)
F. 4-wire flexible conduit from oven
G. Red wires
H. UL fisted wire connectors
I. UL fisted or CSA approved
conduit connector
1. Connect the 2 black wires (C) together using a UL listed wire
connector.
2. Connect the 2 white wires (D) and the green (or bare) ground
wire (of the oven cable) using a UL listed wire connector.
3. Connect the 2 red wires (G) together using a UL listed wire
connector.
4.
1=
Install junction box cover.
Using 2 or more people, lift oven partially into cabinet cutout
using the oven opening as an area to grip.
NOTE: Push against seal area of oven front frame when
pushing oven into cabinet. Do not push against outside
edges.
2.
Push against seal area of front frame to push oven into
cabinet and center oven into cabinet cutout.