Gamut DI 150 Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Amplificador Gamut DI 150. Gamut DI 150 16 páginas. Dual mono integrated amplifier

Placement

The DI 150 will get hot during use. It is important that it has free space all around the ampliﬁ er, espe-

cially the sides and the top.

Your DI 150 has been especially made for the country to which it has been shipped. Any attempt to

change the voltage or other types of modiﬁ cations should be considered unsafe and may cause dam-

age to both the ampliﬁ er and any connected equipment. Warranty is annulled by any form of modiﬁ -

cation performed by any person not authorised by GamuT.

Connect the DI 150 to the mains supply with the supplied IEC mains cable.

For further improvements to the level of sound quality, various types of mains cable type may be

tested. Like the importance of any other cable in the system, the quality and reﬁ nement of the

mains cable has inﬂ uence on the total balance of the sound. Please feel free to experiment with the

various brands available in your country. Please note that GamuT cannot accept responsibility for

damage incurred due to improper usage, connection, or manufacture of other cables than the

enclosed.

The mains switch is located underneath the ampliﬁ er's front right corner. Before switching on the

ampliﬁ er, make sure that volume is reduced to or near zero. After switching on the ampliﬁ er, you will

hear two small clicks from inside the ampliﬁ er and possibly also one from each speaker.

The GamuT DI 150 features six signal level inputs and three available outputs;

Four unbalanced inputs:

•

Tuner

•

Tape

•

HTH (bypass option)

Two Balanced inputs:

•

Bal 1

•

Bal 2

Please note that all connectors of the DI 150 are gold plated. This is done to ensure long lasting and

stable connections. Only use cable and connectors either gold or silver plated.

DI 150