MAJORITY D80 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Altifalantes MAJORITY D80. MAJORITY D80 17 páginas. Bookshelf speakers
Também para MAJORITY D80: Manual do utilizador (18 páginas)

Imprimir página
Instructions Guide
EN
Using Optical digital cable (not included)
Insert an optical digital cable into the main speaker port (Ref.10) and the other
•
end to your TV optical output port or other similar device that you are about to
connect the speakers with.
Change the mode to Optical, by pressing the 'OPT' button on the remote control
•
or use the 'Input' button on the back of the main speaker (Ref.5). The LED light
sensor will turn white, indicating that the speakers are in Optical Mode.
If you are connecting the speakers with a TV using an optical cable, make sure
•
that your TV audio settings are set to 'Optical out' or 'PCM.'
Using the RCA to AUX 3.5 mm cable
Insert the RCA cable provided into the main speaker port L/R 'LINE IN' (Ref.12)
•
and the other end of the cable, AUX (3.5 mm) into an AUX or headphone jack port
of your device.
Change the mode to 'LINE IN', by pressing the 'LINE' button on the remote control
•
(Rem.13) or use the 'Input' button on the back of the main speaker (Ref.5). The
LED light sensor will turn light blue, indicating that the speakers are in 'LINE IN'
Mode.
If you are connecting the speakers with a TV using this cable, make sure your TV
•
audio settings are set to PCM or Analogue.
Using a high-speed HDMI ARC cable (not included)
Insert an HDMI ARC cable, into the main speaker port 'ARC' port and the other
•
end of the cable to your TV or other device- HDMI ARC port that you are about to
connect the speakers with.
Change the mode to 'ARC', by pressing the 'ARC' button on the remote control
•
(Rem.11). The LED light sensor will turn green, indicating that the speakers are in
ARC Mode.
If you are connecting the speakers with a TV using HDMI cable, make sure your
•
TV audio settings are set to HDMI out or PCM.
10