GaN EZ Drive GS65011-EVBEZ Manual técnico - Página 3
Procurar online ou descarregar pdf Manual técnico para Placa-mãe GaN EZ Drive GS65011-EVBEZ. GaN EZ Drive GS65011-EVBEZ 18 páginas. E-hemt open loop boost evaluation board
Imprimir página
_____________________________________________________________________________________________________________________
Introduction
The GS65011-EVBEZ Evaluation Board (EVB) is an open loop Boost converter and was
designed to help customers evaluate GaN Systems' EZDrive
Systems' E-HEMT.
The EZDrive
circuit is a low-cost, easy way to implement a GaN driving circuit using a
®
standard MOSFET controller with integrated driver. The EZDrive
design control for the optimization of efficiency and EMI. It is adaptable to any power
level, any frequency, and any LLC and PFC controller.
The board is populated with GaN Systems' GS-065-011-1-L, a 5×6 mm PDFN package
Enhancement-Mode High Electron Mobility Transistor (E-HEMT).
Evaluation Board Contents and Requirements
Kit Contents
The GS65011-EVBEZ includes the following hardware.
Table 1 •
GS65011-EVBEZ Evaluation Kit Contents
Quantity
Description
GS65011-EVBEZ GaN E-HEMT evaluation board assembly
1
Hardware Requirements
In order to evaluate the performance of the evaluation board, the following equipment is required:
• High speed digital oscilloscope
• DC load (power resistor or electrical load)
• High voltage DC power supply
• Low voltage DC power supply
• DC test leads
GSWPT-EVBEZ Rev. 210307
EZDrive
© 2021 GaN Systems Inc.
Please refer to the Evaluation Board/Kit Important Notice on page 17
®
Open Loop Boost Evaluation Board
solution with a GaN
®
circuit provides
®
www.gansystems.com
GS65011-EVBEZ
Technical Manual
3