Decofire DF102043 Instruções de montagem, segurança e funcionamento - Página 9
Procurar online ou descarregar pdf Instruções de montagem, segurança e funcionamento para Aquecedor Decofire DF102043. Decofire DF102043 17 páginas. Rapid reduction area heater
Também para Decofire DF102043: Instruções de montagem, segurança e funcionamento (17 páginas)
Imprimir página
BB
DD
Step 5.
Align the holes at the bottom of the burner (C) to the
top of the cylinder housing (D) - position to have the
control panel on the burner (C) aligned
with the door on the cylinder housing (D). Through the
aligned screw holes attach the burner (C) to the top of
the cylinder housing (D) using 4 M6 x 12 screws (BB)
and 4 M6 nuts (DD). Be sure to fully tighten.
Step 7.
Place the glass tube (E) into the top of the
glass tube ring (B).
C
E
B
Step 6.
Remove the 3 preassembled screws from the top of the
burner (C). Attach the glass tube ring (B) to the top of the
burner (C) using the 3 screws removed at the beginning of
this step. Be sure to fully tighten.
A
Step 8.
Remove the 3 preassembled screws from the onto the top
of the upper supporters (I). Replace the 3 screws removed at
the beginning of this step to secure the upper combination
(A) to the upper supporters (I). Be sure to fully tighten.
B
Page 9