Gandy 24H13 Manual de peças e montagem - Página 16
Procurar online ou descarregar pdf Manual de peças e montagem para Espalhador Gandy 24H13. Gandy 24H13 19 páginas. 24-inch variable rate spreader
Também para Gandy 24H13: Manual do operador (8 páginas), Manual do operador (8 páginas), Manual do operador (10 páginas)
Imprimir página
Step #17
(Lift Handle Assembly)
1.
Locate Lift Handle (2808886-9), TWO 1/4 x 1/2 hex bolts (C03-0250-010) and TWO 1/4" flange nuts (C01-
0250-030).
2.
Attach Lift Handle to the two 1/4" hole in the front of the hopper using the above listed hardware as
shown in Diagram #29. Tighten hardware securely.
Diagram #29
Spread Plate Adjustment:
18.
As shown in Step #14 Diagram #26, connecting the spread plate chain to the second hole up from the hopper on
the mount tube plate is a good starting point for most material being applied to produce a "Sheet-Like" flow
coming off the spread plate.
Depending on your application rate and weight of the product being applied you may need to adjust the angle
up or down so the material flows freely off the spread plate.
If application without spread plate is desired, lift spreader up and swing spread plate to the lift handle side of
the spreader and hook the s-hook on the sash chain over the lip on the spreader.
See operator's manual for more information.
19. Please read Operators Manual for overview of proper use, maintenance & cleaning of spreader.
Page 16 of 19
2824-A5