IKEA LAGAN FCF186/44 Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Frigorífico IKEA LAGAN FCF186/44. IKEA LAGAN FCF186/44 16 páginas. Lagan

Imprimir página

ENGLISH

• Adequate air circulation should be around

the appliance, lacking this leads to over-

heating. To achieve sufficient ventilation

follow the instructions relevant to installa-

tion.

• Wherever possible the back of the product

should be against a wall to avoid touching

or catching warm parts (compressor, con-

denser) to prevent possible burn.

• The appliance must not be located close to

radiators or cookers.

• Make sure that the mains plug is accessible

after the installation of the appliance.

Service

• Any electrical work required to do the

servicing of the appliance should be car-

ried out by a qualified electrician or com-

petent person.

• This product must be serviced by the After

Sales Service, and only genuine spare

parts must be used. The service numbers

are listed in the Service information.

Operation

Switching on

Insert the plug into the wall socket.

Turn the temperature regulator clockwise to

a medium setting.

Switching off

To turn off the appliance, turn the tempera-

ture regulator to the "O" position.

Temperature regulation

The temperature is automatically regulated.

Environment Protection

This appliance does not contain gasses which

could damage the ozone layer, in either its

refrigerant circuit or insulation materials. The

appliance shall not be discarded together

with the urban refuse and rubbish. The insu-

lation foam contains flammable gases: the

appliance shall be disposed according to the

applicable regulations to obtain from your

local authorities. Avoid damaging the cooling

unit, especially at the rear near the heat ex-

changer. The materials used on this appli-

ance marked by the symbol

ble.

To operate the appliance, proceed as fol-

lows:

• turn the temperature regulator toward

lower settings to obtain the minimum cold-

ness.

• turn the temperature regulator toward

higher settings to obtain the maximum

coldness.

A medium setting is generally the most

suitable.

However, the exact setting should be chosen

keeping in mind that the temperature inside

the appliance depends on:

• room temperature

• how often the door is opened

• the quantity of food stored

• the location of the appliance.

are recycla-