Jamara 053110 EP Instrução - Página 2

Procurar online ou descarregar pdf Instrução para Carro de brincar motorizado Jamara 053110 EP. Jamara 053110 EP 20 páginas. 2,4 ghz
Também para Jamara 053110 EP: Instrução (20 páginas), Instrução (20 páginas), Instrução (20 páginas)

Jamara 053110 EP Instrução
1
3
Avete acquistato un modello RTR. Ciò significa che il veicolo è in gran parte pronto per l'uso
immediato. Tuttavia, è essenziale controllare che il modello non presenti possibili danni
meccanici o elettrici o difetti prima e dopo ogni utilizzo. È inoltre necessario verificare la
libertà di movimento di tutti gli elementi mobili e la tenuta dei collegamenti a vite.
Primi passi
NiMh
Chargement NiMh
Collegare il caricabatterie ad una presa. l LED del caricatore segnala il processo di ricarica.
Collegare il caricabatterie alla batteria del veicolo. In certi casi utilizzare il cavo adattatore fornito per
collegare la batteria con il caricatore. Quando la batteria è completamente carica, il LED non si
spegne. Pertanto, assicuratevi assolutamente che il tempo di ricarica non venga superato. Il
tempo medio di carica della batteria è di circa 6 - 8 ore (NiMh)
Attenzione:
Caricare solo batterie adeguate per questo caricatore. Batterie adeguate sono batterie di Nickel
metal hydride con massimo 6 celle, massimo 7.2V tensione nominale e massimo 2000mAh. La
batteria deve avere un collegamento di bilanciamento del tipo JST-XH. Il caricamento di batterie
inadatte può causare danni al caricabatteria e le batterie. Pericolo di incendio! Il collegamento di
bilanciamento del caricabatteria non deve mai essere risaldato o modificato!
Chargement LiPo
Note importanti sull'idoneità della batteria:
Assicurarsi di utilizzare solo batterie ai Polimeri di Litio con connettore XH balancer. Solo queste
possono essere utilizzate con il caricatore. Altri collegamenti e tipi di batterie non possono essere
utilizzati (si può verificare il rischio di incendio dovuto all'inversione di polarità o al sovraccarico).
Si prega di contattare il produttore della vostra batteria per sapere se la vostra batteria è adatta. Uti-
lizzare solo batterie LiPo con una capacità di almeno 1600mAh (altrimenti c'è il rischio di incendio
a causa della corrente di carica eccessiva). Se si utilizzano batterie con una capacità inferiore a
1600mAh, le batterie devono essere approvate per una corrente di carica di 1600mA (carica rapida).
Si prega di chiedere al produttore della vostra batteria se la vostra batteria soddisfa questi requisiti.
È possibile collegare solo una singola batteria alla volta al caricatore. Caricare 2 batterie
allo stesso tempo NON è permesso e causerà danni alla batteria o al caricatore (pericolo di
incendio).
1
2
Version 053112
4
5
6
2
3
IT - Lieferumfang
1. Modello
2. Telecomando
3. Antenna
4. Clip per precarico molla
5. Connettore di collegamento
6. Batteria
7. Caricatore
Accessori:
• Telecomando: 4 x AA 1,5V,
2
No. 140267 (4 pezzi)
Dati tecnici:
• Dimesioni:
~ 410 x 270 x 156 mm
• Peso:
~ 2591,4 g
(No. 053110 / 053111)
~ 2430,2 g (No. 053112)
• Batteria:
NiMh 7,2 V 2000 mAh
7
(No. 053110)
LiPo 7,4 V 5000mAh
(No. 053111 / 053112)
• Motor:
270 W
(No. 053110 / 053111)
420 W 3200 KV
(No. 053112)
Le informazioni non sono
garantite. Ci riserviamo il diritto di
apportare modifiche tecniche e la
possibile presenza di errori.
You have purchased a RTR model, which means it should be ready for immediate use after
charging all batteries. You need to check the car, electronics and all plastic parts after each
use to make sure no parts are damaged. Also all the moving parts must be checked for their
clearance, bolts and screws that they are tight.
Getting Started
NiMh Charging process
Connect the charger to the AC Network and plug it into a grounding receptable. The LED on the
charger will indicate it is ready for charging. Connect the charger to the battery. If the plug of the
charger and battery do not match, then you will find a connection lead in your box. The charger's
LED does signal the charging process. When the battery is fully charged, the LED will not go
out. Make sure that the charging time is not exceeded.
The average charging time of the empty battery is about 6-8 hours (NiMh)
Caution:
Only charge suitable battery's with this charger. Suitable battery's are Nickel metal hydride battery's
with max. 6 cells, max. 7,2 V nominal voltage and max. 2000mAh. The battery must have a tamiya
plug. The charging of unsuitable battery's can cause damage to the charger and the battery's.
Fire Hazard! The charging connection of the charger is not allowed to get altered or soldered to a
different balancer plug type!
LiPo Charging process
Important notes on the suitability of the battery:
Make sure to use only lithium polymer batteries with XH balancer connector. Only these may
be used with the charger. Other connections and battery types must not be used (fire hazard due to
reverse polarity or overcharging may result).
Please contact the manufacturer of your battery to find out whether your battery is suitable. Only
LiPo batteries with a capacity of at least 1600mAh must be used (otherwise there is a risk of
fire due to excessive charging current). If you use batteries with a capacity below 1600mAh, the
batteries must be approved for a charging current of 1600mA (Speedcharging). Please ask the
manufacturer of your battery if your battery meets these requirements.
You may only connect one single battery to the charger at a time. Charging 2 batteries at
the same time is NOT allowed and will cause damage to the battery or charger (fire hazard).
IT
1.
Ingresso 100 - 240 V
2.
Attacchi di bolanciatore 2 cella
3.
Attacchi di bolanciatore 3 cella
(Non richiesto per questo modello)
4.
LED di stato
4
GB
1.
Power Slot 100 - 240 V
2.
2S Balancer
3.
3S Balancer
(Not required for this model)
4.
Status LEDs
GB - Box contents
1. Model
2. Transmitter
3. Antennas
4. clip for spring tension
5. Binding Plug
6. Battery
7. Charger
Accessories:
• Transmitter: 4 x AA 1,5V,
No. 140267 (4 pieces)
Technical data:
• Dimensions:
~ 410 x 270 x 156 mm
• Weight:
~ 2591,4 g
(No. 053110 / 053111)
~ 2430,2 g (No. 053112)
• Battery:
NiMh 7,2 V 2000 mAh
(No. 053110)
LiPo 7,4 V 5000mAh
(No. 053111 / 053112)
• Motor:
270 W
(No. 053110 / 053111)
420 W 3200 KV
(No. 053112)
No responsibility is taken for the
correctness of this information.