Century Heating BANFF HES80 Instruções de instalação e manual do proprietário - Página 6

Procurar online ou descarregar pdf Instruções de instalação e manual do proprietário para Fogão Century Heating BANFF HES80. Century Heating BANFF HES80 8 páginas. Freestanding electric stove

Imprimir página

1. Electrical Specifications

Fig. 2 Secure fan assembly to base of pedestal.

1WARNING: Disconnect power before

attempting any maintenance or cleaning

to reduce the risk of fire, electrical shock

or personal injury.

Maintenance of Motors

The motors used on the fan and the flame generator

assembly are prelubricated for extended bearing life

and require no further lubrication. However, periodic

cleaning/vacuuming of the fan/heater unit is recom-

mended.

WARNING: Make sure the power is turned

off before proceeding.

Replacing Light Bulbs

This stove uses two clear 120 Volt, 60 Watt, E-12

socket base light bulbs (small base, chandelier candle-

type). The 60 Watt bulbs are located under the log

set/ember bed. For convenience, if one of the bulbs

burns out, it may be a good idea to replace both of the

light bulbs.

1. Turn off power to the unit by unplugging the power

cord.

2. Let stove cool if it has been operating.

3. Remove rear access panel from back of pedestal to

expose light bulbs.

Fan Assembly

ST818

Service Instructions

Fig. 3 Attach brass handle to front of unit.

CAUTION: Be careful not to touch or bend the flame

generator.

4. Examine the bulbs to determine which bulb needs

to be replaced.

5. Unscrew defective bulb(s).

6. Install new 60 Watt light bulb(s).

7. Replace rear access panel. Plug power cord into

wall outlet.

WARNING: Do not exceed 60 watts per

bulb. Use of higher rated bulbs may result

in a fire, causing property damage or per-

sonal injury.

S190006