Britax 2406A Manual - Página 6

Procurar online ou descarregar pdf Manual para Porta-bebés Britax 2406A. Britax 2406A 6 páginas. Rocker with toys

TO UNFOLD THE ROCKER

To unfold, holding the rocker at the front with one hand,

simply pull the backrest backward with the other hand

until fully open.

You should hear a "click" sound as frame locks into

position. The seat is now in the upright position.

WARNING: ENSURE THAT ALL THE LOCKING DEVICE

ARE ENGAGED INTO POSITION BEFORE USE.

TO FIT & USE THE CANOPY

To fit the canopy, put the canopy over the seat, make sure that the plastic lever

at the back is not covered by the canopy and then simply slide the clip into both

sides as shown.

To remove, simply pull it out.

A-1

To use the canopy, simply push it forward or fold it back.

TO FIT & ADJUST HEAD PILLOW

Put the shoulder harness through the

appropriate harness hole as shown.

Adjust the head pillow height by attaching

the loop & hook at the back of the head

pillow.

www.britax.com.au

A-2

TO FIT THE SHOULDER HARNESS PADS

To fit the shoulder harness pads, push each

shoulder harness through pads.

TO SECURE YOUR CHILD

WARNING: Use this harness at all times.

A five point harness is provided to restrain

your child. To secure the child in the harness,

push buckle prongs (A) and (B) into buckle

housing (C) until the buckle prongs snap

into position. carefully adjust the harness by

pulling the slider (D) until the desired fit is

achieved in the lap, shoulder and crotch straps.

To release the buckle, squeeze the top and

bottom prongs..

Put the crotch pad over the buckle housing and snap to close.