Century UK MAX-THRUST RUCKUS Manual de montagem e de instruções - Página 7

Procurar online ou descarregar pdf Manual de montagem e de instruções para Controlo remoto Century UK MAX-THRUST RUCKUS. Century UK MAX-THRUST RUCKUS 11 páginas. R/c aerobatic sports aircraft

Imprimir página

7. Wing Fixing

The moulded wing cowling

is used to secure the wing

to the fuselage and can only

be fitted one way round. The

cutout is towards the front on

the aircraft.

The longer screws are used at

the front.

2 x M4 x 55mm Screw

1 x M4 x 38mm Screw

The moulded wing cowling

should be installed once the

wing is in place and the cables

are threaded though to the

cockpit area. The wing and

cowling can now be secured

to the fuselage using the 3

M4 screws.

8. Receiver Installation

Connect the speed controller to the throttle channel of your receiver (receiver not included in

PNP versions). This wire is easily identified, it is the only one that is routed from the front of the

model.

Connect the rudder and elevator servos to the corresponding channel outputs of the receiver

and then connect the Y-lead from the ailerons to the aileron channel output and the lights to any

spare receiver channel. There is a moulded recess in this compartment which is sufficient to

accommodate most popular 2.4GHz receivers; however there is ample room elsewhere to locate

yours if it does not.

We recommend that it should be securely positioned with self-adhesive "Velcro".

You must adhere to the receiver manufacturer recommendations regarding positioning and

aerial routing.

Revision V1.0