Gantom ST130 Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Destaque Gantom ST130. Gantom ST130 15 páginas.

If you hit the "Other Options" button on the control screen, the following menu appears:

BOOT SEQUENCE FLASHING

When the fixture first receives power, before it enters normal operation, it will first report its channel

mapping profile and second report its DMX address through a sequence of flashes.

By default, the DMX starting address will be 1. The Storm Form DMX will flash several times when it is

powered on to indicate its starting address. If the Storm Form DMX is assigned to address 245 it will

report its address by flashing 2 times, pausing briefly, then flashing 4 times, pausing briefly, then flashing

5 times. If it is assigned to DMX address 038, it will flash 3 times, pause briefly, then flash 8 times

TURN OFF/ON boot sequence flashing: You may not want your fixture to report its channel mapping

profile and address every time it receives power. In order to toggle the boot sequence flashes on/off,

follow these steps. With the fixture connected to the DMX Programmer App, select the "Generic

Console" profile. Once the control screen appears, power cycle the Storm Form DMX. Next, tap the

"Other Options", then tap the "Toggle Silent Bootup" button. The light should blink to indicate that it

has received this new setting.

OTHER OPTIONS SCREEN

Reset - selecting this will reset the fixture to its default

factory settings. Do this if you are running into programming

issues.

Toggle Silent Bootup – By default, the fixture will flash to

report its DMX address when it is powered on. tapping the

"Toggle Silent Bootup" option will turn address reporting at

startup on or off.

Lock/Unlock 9600 – The Storm Form DMX fixture can

listen to either a standard DMX signal OR to the special

control signal that comes from the app. Lock 9600 will turn

OFF the fixture's ability to listen to DMX and ONLY allow it to

be controlled through the app interface. For most applications

it is recommended that you keep "UNLOCK 9600" selected.

Storm Form and Storm Form DMX User Guide

Version 1.1 – 2/25/2021