Gantom ST133 Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Destaque Gantom ST133. Gantom ST133 15 páginas.

STANDALONE OPERATION

Some applications may not require live DMX control. In order to configure your Storm Form DMX for

standalone operation, all you must do is use the CH1 slider on the Generic Console control screen to set

the desired intensity level. Once the light has the desired output, tap the "STORE AS DEFAULT" button at

the lower left portion of the screen to save this setting directly into the light fixture. Now, when the light

fixture receives power it will automatically go to this newly saved DEFAULT setting once it's boot

sequence is complete. Please note that if DMX signal is passed to the fixture while it is operating in

standalone mode, the DMX signal will override the standalone setting.

DMX CONTROLLED OPERATION

The Storm Form DMX was designed for use with standard DMX512 control systems. The Storm Form

DMX occupies a single DMX channel and can be given any DMX starting address from 1-512. Please note

that the Storm Form DMX does not feature any RDM functionality.

ADDRESSING YOUR FIXTURE

To set the DMX address, first connect the Storm Form DMX to the

DMX Programmer app by Gantom as was outlined earlier in this

document. With the Generic Console control screen open, you should

have full control of the fixture using the CH1 slider. If the light fixture

is connected to the app but is not responding, try power cycling the

light fixture.

Once you have verified that the light fixture is responding to control

signal from the app, tap the number field next to the word "Address".

A new screen will pop up, prompting you to enter a DMX address.

After you enter your desired DMX address, the app will return to the

Generic Console screen. Finally, you must hit the ASSIGN ADDRESS

button in order to save the new address into the fixture. Hitting the

"Save" button will not save anything to the light fixture's memory.

Storm Form and Storm Form DMX User Guide

Version 1.1 – 2/25/2021