Airflow ecoDRY mini Manual de instalação e funcionamento - Página 2

Procurar online ou descarregar pdf Manual de instalação e funcionamento para Secador Airflow ecoDRY mini. Airflow ecoDRY mini 4 páginas.

Mechanical Installation

The ecoDRY mini has to be installed at a minimum height of 120cm (from the ground to the air

outlet/bottom of the dryer). The hand dryer should be positioned at least 60cm from a bathtub,

shower or hand basin. Where multiple dryers are being installed alongside each other, allow

enough space for people to access the dryer. Also, if installing next to an adjoining wall, the

dryer should be positioned at least 200mm from this wall to allow for proper access.

You should ensure that the electrical supply (tension) does not exceed the maximum power of

the apparatus (220-240v). This product is intended for installation by a suitably qualified

person.

Specification

Fan Drying:

Protection:

Fan Speed:

Weight:

Compliant:

Operating

The hand dryer comes into operation and automatically stops by hands approaching and

moving away from the cone air outlet.

Warning: In case of an overload of internal temperature, a thermostat with automatic reset

protection suspend the operation of the motor. This device gives the user greater safety of

operation.

The unit has heating element. Air is then heated by the power of motor and heating element.

This dryer allows considerable energy savings compared to traditional dryers, reducing

consumption as our trading indications. In case of overheating a safety thermostat switch off

temporary the heating element.

The device has a system that prevents vandalism continuous operation, caused for example by

covering the photocell. If this occurs, the dryer can work without interruption for about 60

seconds, then automatically stops waiting for (stand by)

It will be simply needed to remove the cover that blocks the photocells to ensure the dryer to

resume its normal function in 3-4 seconds.

Maintenance

Warning: Before performing any maintenance, please disconnect the appliance from the

network.

Clean this dryer using a soft cloth dampened with water and detergent. To ensure the durability

and reliability of this product, periodically check that the grid inlet and outlet of the cone are not

clogged by dust or any equivalent material.

20 seconds

Class II

2800 rpm

1.2 Kg

CE, RoHS, WEEE