CeoTronics CT-DECT Base Manual de Instruções - Página 16
Procurar online ou descarregar pdf Manual de Instruções para Sistema de microfone CeoTronics CT-DECT Base. CeoTronics CT-DECT Base 20 páginas. Headset for wireless duplex communication
Também para CeoTronics CT-DECT Base: Manual de Instruções (20 páginas), Manual de Instruções (14 páginas), Manual de Instruções (14 páginas), Manual de Instruções (20 páginas)
Imprimir página16.
On-air subscription of the standard headsets to the base headset
Base headset and standard headset(s) can also be used in conjunction with other CT-DECT
devices resp. CT-DECT GateCom devices. The on-air subscription of a headset to one of these
devices is carried out analogous and in the sequence as described in section 15.1...15.2. Going
to do so, first ascertain which of the devices is the base device and which a standard device.
For on-air subscription at a CT-DECT device or at a CT-DECT GateCom device always the on/off
switch and the subscription button(s) are used.
In every case notice the special CeoTronics operating instructions for the other CT-DECT device
resp. CT-DECT GateCom device.
16.1 General
INFORMATION
Subscribing CT-DECT devices standard into a CT-DECT device base is usually only
necessary if a CT-DECT system is put into operation for the first time or if individual CT-DECT
devices are replaced, e.g. after repairs.
A CT-DECT device standard can only be subscribed into a single CT-DECT devices base ,
never into two or more simultaneously.
Depending on the scope of delivery, it is possible that the CT-DECT devices were already
subscribed appropriately to one another at the QA final inspection at CeoTronics.
In this case you will find a note with the shipment. If there are several CT-DECT device base,
the CT-DECT device are marked in accordance with their assignment to the respective CT-
DECT device base.
Two CT-DECT devices standard can never be subscribed simultaneously at a CT-DECT
device base but always consecutively only.
With several CT-DECT device standard it is advisable to subscribe all devices in an device
group directly one after the other to the CT-DECT device base, because otherwise an device
may be deleted by mistake (»Principle of Subscribing «).
Keep to the sequence of operating steps.
All newly subscribed devices must be switched off again after subscription.
Each headset has its own internal identification number. First of all an allocation must always take place
between the base headset and the maximum of four standard headsets. This subscription procedure,
which has to be performed once only, is performed on the base headset and the maximum of four
standard headsets manually by means of a procedure carried out by the operator.
If a fifth standard headset would be subscribed to the base headset, the standard headset that
was subscribed in first would be deleted from the data memory of the base headset. See the
following example.
Principle of subscription (example)
16 von 20