KitchenAid KICU569XBL Manual de instruções de instalação - Página 5

Procurar online ou descarregar pdf Manual de instruções de instalação para Placa de fogão KitchenAid KICU569XBL. KitchenAid KICU569XBL 16 páginas. 30" (76.2 cm) and 36" (91.4 cm) electric

Imprimir página

1. Electrical Requirements

Prepare Location

1. Decide on the final location for the cooktop.

NOTE: Countertop must be 1

thick.

2. If necessary, make cutout in countertop before installing

cooktop. See "Location Requirements" section for more

information.

3. Clean cutout of any remaining dust and debris.

Install Brackets

NOTE: Cooktop Bracket Adhesive Kit Part Number W10310006

is required for installing the cooktop into a marble countertop.

See the "Assistance or Service" section of the Use and Care

Guide for information on ordering.

To Install Brackets into Marble Countertop

1. Clean the brackets and cooktop cutout of any dust and

debris.

2. Measure the center line of the vertical sides of the cooktop

cutout.

3. Apply the adhesive provided in the kit to the back side of the

brackets.

05-Sep-2019 13:08:05 EDT | RELEASED

INSTALLATION INSTRUCTIONS

⁄

" (3.0 cm) to 2" (5.1 cm)

Center line

In some European factories the letter "W" of the part code mentioned herein will be automatically

4. Position brackets in the center of the vertical centerline and

align the upper edge of the brackets so that they are flush

with the countertop.

5. Push the brackets firmly onto each side of the cooktop

cutout and wait 1 hour for adhesive to dry.

1 h

To Install Brackets into Wood Countertop:

1. Measure the center line of the vertical sides of the cooktop

cutout.

2. Position brackets in the center of the vertical centerline and

align the upper edge of the brackets so that they are flush

with the countertop.

3. Attach the brackets in the cutout with the screws provided.

A. Bracket

B. Screw

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

Center line