Ganz ZC-DT8312NXA-IR Manual de instruções - Página 2

Procurar online ou descarregar pdf Manual de instruções para Câmara de segurança Ganz ZC-DT8312NXA-IR. Ganz ZC-DT8312NXA-IR 2 páginas. Zc-dt8000-irseries. outdoor color camera 700tvl high resolution color / day & night

Imprimir página
INSTALLATION
Surface mount
Flush mount
(embedding in ceiling or wall)
* Mounting
Adaptor Ring
(optional)
* Camera Unit
(Attaching to a gang box)
*
Use the elastic band to
hang the camera unit
upon necessity for the
installation.
WARNING : Do not
release your hands
from the camera
unit until securing it.
☞Attention
Please use fixing screws suitable for the material of the ceiling or wall when
attaching the camera body. The mounting screws provided are not recommended
to use at a conditionns.
* Surface mount
This section explains how to install the unit where cables are running through the
interior of the ceiling or wall.
1. Drilling holes in the ceiling or wall: Use the template included to mark out the
position on the ceiling or wall where you want to install the unit.
2. When running cables through the interior of the ceiling or wall : Use the template,
and drill two or three holes for screws used to attach the camera body and one hole
for the cables (Cables).
* Flush mount
- Embedding in the ceiling or wall
Be sure to use the Mouting Adaptor Ring when embedding the unit in the ceiling or wall
1. Drilling holes in the ceiling or wall : Use the template included to mark out
the position on the ceiling or wall where you want to install the unit.* Use the template,
drill 4 holes for screw used to attache the Mounting Adaptor Ring. Then, follow the
perforations on the template and cut out a hole to embed the camera body.
2. Attaching the Mounting Adaptor ring : Attach the adaptor ring to the ceiling or wall to
which you want to attach the camera body. Please use fixing screws suitable for the
material of the ceiling or wall when attaching the camera body. We recommend using
screws with a 4mm diameter.
3. Attaching the camera body : Remove the surface mount cover from the camera
body. Remove the body cover and attached camera body to the Mounting Adapter Ring.
- Attaching to gangbox
1. Remove the surface mount cover from the camera body.
2. Attaching the camera body : Attach the camera body to the gangbox.
Please use screws that are suitable for the gang box.
(Use breakable holes on the camera body bottom)
ADJUSTMENT
1. Direction and Lens
The camera body is set in a tri-axial mounting allowing movement in the
pan, tilt and rotational planes.
1) Adjust the direction of the lens so it faces the subject
2) Move the lever to adjust focus and angle of view
3) When you finished adjusting the direction of the lens, tighten the locking
screw with a screwdriver.
1)
2)
3)
☞Attention
T
he picture image may deteriorate when
the lens is leaned toward ceiling or wall
to view through the circled vertical area
and the effect may depending on the
view angles.
It is not recommended to view through the circledd vertical
area especiallly witth LED light trurned on as the picture
image is subject to a LED light reflection.
Since these image deterionration is normal, installers are
encouraged to check the image under LED-ON environment
at the time of installation in order to avoid unexpected image
deterioration.
2. Switches
1) Slide Switch for Sync. System
Use the Slide Switch within the camerra
* L-L : Line Lock
* INT : Internal
L-L
INT
2) Multitack Switch for OSD
Use the Multi Tact Switch within the camerra
Direction and Enter Guide
Enter
Up
Left
Right
Down
3. OSD Menu
OSD MENU FUNCTION
LENS
AUTO
MANUAL
SHUTTER/AGC
AUTO
MANUAL
WHITE BAL
ATW PUSH USER1 USER2 ANTI CR MANUAL PUSH LOCK
BACKLIGHT
OFF
BLC
HLC
PICT ADJUST
MIRRO BRIGHTNESS CONTRAST SHARPNESS HUE GAIN
OFF ON
ATR
MOTION
OFF ON
PRIVACY
OFF ON
DAY/NIGHT
EXT1 EXT2 AUTO COLOR B/W
NR
CAMERA ID
SYNC
LANGUAGE
CAMERA RESET
EXIT
* START SET UP MENU
1st Page OSD
Press the Middle Multi Tact Switch, the main setup menu is displayed on the monitor
screen
SETUP MENU
Select the function
LENS
AUTO
SHUTTER/AGC
AUTO
* A function with the icon
by using the switch
WHITE BAL
ATW
has sub menus.
BACKLIGHT
OFF
Up
To select a sub menu,
PIC ADJUST
ATR
OFF
select a function with
MOTION DET
OFF
the icon and press
Down
NEXT
the switch
EXIT
SAVE ALL
Enter
1) LENS
Turn the Switch toward Left or Right side, Select AUTO or MANUAL
Left
Right
AUTO
AUTO IRIS
SETUP MENU
SETUP
TYPE
DC
LENS
AUTO
OPEN
CLOSE
MODE
AUTO
SHUTTER/AGC
AUTO
SPEED
000 ~ 255
WHITE BAL
ATW
BACKLIGHT
OFF
MANUAL
PIC ADJUST
* Simply make the adjustment in the following order to help
ATR
OFF
make the focusing easier:
MOTION DET
OFF
- Select MANUAL
NEXT
- Adjust lens focus well
EXIT
SAVE ALL
- Then return to AUTO
2) SHUTTER/AGC
Attention
For regular Auto-Iris use, ensure to set "AUTO IRIS" (Not "SHUT+AUTO IRIS)
in this "SHUTTER/AGC" OSD menu
SETUP MENU
SETUP
LENS
AUTO
AUTO
HIGH LUMINANCE
SHUTTER/AGC
AUTO
MODE
AUTO IRIS
SHUT + AUTO IRIS
WHITE BAL
ATW
BRIGHTNESS
000 ~ 255
BACKLIGHT
OFF
LOW LUMINANCE
PIC ADJUST
OFF
MODE
AGC
ATR
OFF
BRIGHTNESS
x0.25 ~ x1.00
MOTION DET
OFF
NEXT
MANUAL
MODE
SHUT+AGC
1/50 ~ 1/10000 *Flickerless
EXIT
SAVE ALL
SHUTTER
AGC
6.00 ~ 44.80
Attention
BRIGHTNESS adjusts DC level of the lens
Attention
"Flickerless" function can be available by SHUTTER/AGC
MANUAL
SHUTTER 1/100(NTSC) 1/120(PAL)
return to "AUTO" to fix the setting
3) WHITE BALANCE
ATW
SPEED
000~ 255
SETUP MENU
DELAY CNT
000~ 255
SETUP
AGC
x0.50~ x2.00
LENS
AUTO
ENVIRONMENT OUTDOOR
INDOOR
SHUTTER/AGC
AUTO
PUSH
WHITE BAL
ATW
USER1
BACKLIGHT
OFF
B-GAIN
000 ~ 255
PIC ADJUST
R-GAIN
000 ~ 255
ATR
OFF
USER2
MOTION DET
OFF
B-GAIN
000 ~ 255
NEXT
R-GAIN
000 ~ 255
EXIT
SAVE ALL
ANTI CR(ANTI COLOR ROLLING)
MANUAL
LEVEL
019 ~ 078
PUSH LOCK
4) BACKLIGHT 5) PICTURE ADJUST 6) ATR(D-WDR)
SETUP MENU
MIRRO
SETUP
BRIGHTNESS
LENS
AUTO
CONTRAST
SHUTTER/AGC
AUTO
SHARPNESS
WHITE BAL
ATW
HUE
BACKLIGHT
OFF
BLC-HLC
GAIN
PIC ADJUST
ATR
OFF
ON
MOTION DET
OFF
NEXT
LUMINANCE
EXIT
SAVE ALL
CONTRAST
7) MOTION DETECTION
SETUP MENU
SETUP
LENS
AUTO
SHUTTER/AGC
AUTO
MOTION DET
WHITE BAL
ATW
BACKLIGHT
OFF
DETECT SENSE
BLOCK DISP
PIC ADJUST
MONITOR AREA
ATR
OFF
AREA SEL
MOTION DET
OFF
ON
NEXT
EXIT
SAVE ALL
8) PRIVACY MASKING
PRIVACY
SETUP MENU
SETUP
AREA SEL
PRIVACY
OFF
ON
DAY/NIGHT
AUTO
NR
CAMERA ID
OFF
SYNC
INT
COLOR
TRNSP
LANGUAGE
ENGLISH
MOSAIC
CAMERA RESET
BACK
Attention
EXIT
SAVE ALL
9) DAY/NIGHT
EXT2
AUTO
SETUP MENU
DAY/NIGHT
SETUP
BURST
PRIVACY
OFF
DAY/NIGHT
EXT1
DELAY CNT
DAY->NIGHT
NR
NIGHT->DAY
CAMERA ID
OFF
COLOR
SYNC
INT
B/W
LANGUAGE
ENGLISH
B/W
CAMERA RESET
BURST
BACK
IR OPTIMIZER
EXIT
SAVE ALL
NTSC :1/100
PAL
: 1/120
* IR OPTIMIZER : It minimizes overexposure
WARNING
DAY/NIGHT uses EX1 not AUTO for regular applications
Do not set the above EX2
10)NR 11)CAMERA ID 12)SYNC 13)LANGUAGE 14)RESET
NR MODE
SETUP MENU
SETUP
Y LEVEL
PRIVACY
OFF
C LEVEL
DAY/NIGHT
AUTO
NR
CAMERA ID
OFF
ON
SYNC
INT
* OSD automatically reflects Power and Sync Switch positon to be set as:
LANGUAGE
ENGLISH
Power
Sync Switch
CAMERA RESET
INT
DC 12V
BACK
LL
EXIT
SAVE ALL
INT
AC 24V
LL
Japanese
German French Russian Portuguese Spanish Chinese
* Return to Factory Setting
OFF - ON
000 ~ 255
000 ~ 255
000 ~ 255
000 ~ 255
000 ~ 255
MID-HIGH-LOW
MID-HIGH-LOW
000 ~ 127
ON
OFF
ENABLE
ON
OFF
1/4 ~ 4/4
TOP
000 ~ 244
BOTTOM
000 ~ 244
LEFT
000 ~ 474
RIGHT
000 ~ 474
2nd Page OSD
1/8 ~ 8/8
TOP
000 ~ 244
BOTTOM
000 ~ 244
LEFT
000 ~ 474
RIGHT
000 ~ 474
1 ~ 8
1.00 ~ 0.00
ON
OFF
When MOTION DEC ON,
only 4 AREAS available.
ON
OFF
000 ~ 255
000 ~ 255
000 ~ 255
ON
OFF
OFF
ON
MODE AUTO - CENTER
LEVEL
000~031
when an infrared LED light source is used
Y/C
OFF
Y
C
000 ~ 15
000 ~ 15
* NR : DIGITAL NOISE REDUCTION
* Y LEVEL : B/W SIGNAL LEVEL
* C LEVEL ; COLOR SIGNAL LEVEL
Sync
INT
* INT: Internal Sync
INT
* LL : Line Lock
INT
LL
CBC Co.,Ltd
Tokyo, Japan
www.GANZ.jp