Ganz ZC-DWT4039 PHA Manual de operação - Página 4

Procurar online ou descarregar pdf Manual de operação para Câmara de segurança Ganz ZC-DWT4039 PHA. Ganz ZC-DWT4039 PHA 5 páginas. Wide dynamic range

VANDAL RESISTANT DOME CAMERA

ZC-D4000 series

Enclosure Installation Manual

Precautions

・Do not attempt to dismantle the camera module mounted

within the dome. There are no user serviceable parts within

the camera module. Refer servicing to qualified personnel.

・Handle the camera with care. Do not abuse the camera.

Avoid striking or shaking it. Improper handling and storage

could damage the camera.

・Do not operate the camera outside of its temperature,

humidity or power source rating range. Please refer to the

environmental information provided overleaf.

Methods for mounting the enclosure

There are three main ways to mount and attach the dome

enclosure:

A: Flush mount using screws

B: Flush mount using locking arms

C: Surface mount using the outer ring

Note: Always use the template provided

When mounting externally

When mounting externally using the four base holes, use

the supplied rubber o-rings (shown in C) within the

mounting holes to ensure a moisture-resistant seal. Make

sure that the cable entry through either knockout panels is

suitably sealed against moisture ingress. Regardless of

whether the locking arms are used for installation or folded

away (in favor of another installation method), always

make sure the locking arm screws are tight enough to

compress the rubber o-rings to maintain the moisture seal.

Packing list

Vandal Resistant Dome Enclosure

4 #12 x 1 1/2 mounting screws

4 rubber sealing o-rings

4 wall plugs

1 Torx bit

1 Camera chassis & liner

1 wire ended power adaptor lead

4 plastic screw caps to conceal the dome cover screws

1 large rubber gasket (fitted between enclosure and

outer ring)

1 ¾" sealing plug (1/2" sealing plug fitted to enclosure)

1 ½" and 1 ¾" cable entry grommets

Weather resistance

IP66 Rated