KitchenAid Pro Line Series Instruções de instalação e manual de utilização e cuidados - Página 9
Procurar online ou descarregar pdf Instruções de instalação e manual de utilização e cuidados para Placa de fogão KitchenAid Pro Line Series. KitchenAid Pro Line Series 12 páginas. Commercial style gas cooktop
Também para KitchenAid Pro Line Series: Manual (14 páginas), Instruções de instalação (2 páginas), Manual de início rápido (6 páginas), Manual de utilização e cuidados (20 páginas)
Replacing
the Halogen
lamps:
36" (91.4 crn) and 42" (106,7 crn) hoods
shown.
Before you begin, make sure that
the range hood is turned
off and
that the other lamps have had
sufficient
time to cool. Halogen
bulbs burn extremely
hot.
To replace a halogen lamp:
• Remove 2 screws from the
circular metal trim around the
lamp assembly.
• Pull the trim with the lamp
assembly
attached down far
enough so that the lamp can be
pushed out of the socket.
• Insert the new lamp into the
socket and push the lamp and
trim assembly
back up into the
hood.
• Replace the trim.
Operation
The canopy hood is designed to
remove smoke, cooking vapors
and odors from the cooktop area.
For best results, start the hood
before cooking and allow it to
operate several minutes after the
cooking is complete
to clear all
smoke and odors from the kitchen.
Opening
the
canopy
hood
control
panel:
The hood controls
are located on
the right-hand
underside
of the
canopy.
controls
,\
\
\
Cleaning
Filters:
The filters should
be washed
frequently.
Place metal filters in
dishwasher
or hot detergent
solution
to clean.
To remove filters:
Note: Use two hands to remove
filters, one to pull and turn the
knob, the other to hold the filter
so that it doesn't fall onto the
cooktop.
• Pull knob forward,
toward the
front of the hood, while turning
the knob to the left (counter-
clockwise)
to release the locking
lever.
light
blower
blower
speed
switch
switch
switch
Operating
the light:
ON: Move the light switch to the
"1" position.
OFF: Move the light switch to the
"0" position.
Operating
the
blower:
ON: Move the blower
switch to
the "1" position.
OFF: Move the blower switch to
the "0" position.
Adjusting
the blower
speed:
The blower
has three speed
control.
Move the blower speed switch to:
"1" position
for low speed,
"2" position
for medium
speed,
or "3" position for high speed.
To reinstall filters, see Step 16.
Exterior
surfaces:
• Do not use steel wool or soap-
filled scouring
pads.
• Rub in direction
of the grain line
to avoid marring
the surface.
• Always wipe dry to avoid water
marks.
• KitchenAid ,_R: Professional
Formula Stainless
Steel Cleaner
& Polish is the cleaner
recommended
for cleaning
stainless steel surfaces on this
product.To order call our
Customer Service Center at
1-800-442-9991 or order on-line at
www.applianceaccessories.com
and ask for part number
8171420.To order from Canada,
call 1-800-807-6777.
• if commercial
cleaners are used,
follow
label directions.
Do not
use products
that contain
chlorine
(bleach). Chlorine
is a
corrosive
substance.
For routine
cleaning
and
fingerprints,
use liquid detergent
soap and water, or all-purpose
cleaner. Wipe with damp cloth or
sponge, then rinse with clean
water and wipe dry.
Optional
Installation
Kits available
from your dealer.
Note: Kits are available
in stainless steel only.
Backsplash:
Must be installed before hood is installed.
30" (76.2 cm) hood: Kit No. 8285148
36" (91.4 cm) hood: Kit No. 8284756
42" (106.7 cm) hood: Kit No. 8284827
48" (121.9 cm) hood: Kit No. 8284755
Vent covers: 12" (30.5 cm) high, 12" (30.5 cm) deep.
30" (76.2 cm) hood: Kit No. 8285149
36" (91.4 cm) hood: Kit No. 8284753
42" (106.7 cm) hood: Kit No. 8284828
48" (121.9 cm) hood: Kit No. 8284752
Chimney
extensions: extends from 12" (30.5 cm) to
23" (58.4 cm) high. For use with 30" (76.2 cm), 36"
(91.4 cm), 42" (106.7 cm) and 48" (121.9 cm) hoods:
Kit No. 8284754
Vent transition:
transitions
from two 3-1/4" x 10"
(8.3 x 25.4 cm) vents to one 10" (25.4 cm) round vent.
Not for use with chimney
extension
Kit No. 8284754.
30" (76.2 cm) hood: Not available
36" (91.4 cm) hood: Not available
42" (106.7 cm) hood: Not available
48" (121.9 cm) hood: Kit No. 8284757