Ganz ZN-DNT350VE Manual de instalação rápida - Página 2

Procurar online ou descarregar pdf Manual de instalação rápida para Câmara de segurança Ganz ZN-DNT350VE. Ganz ZN-DNT350VE 6 páginas.

Step2. Connect cables to IP device

Connect each cable to the device. To see the correct positions of all connectors, refer to the following image

below.

DC 12V

LAN

Make sure the polarity is correct. Incorrect connection may

cause malfunction or damage to the IP device.

Caution

Step3. Set up network environment

The default IP address of your IP device is 192.168.XXX.XXX. You can find the available IP address from the

MAC address of your device. Please make sure the device and your PC are on the same network segment

before running the installation. If the network segment was different between your PC and the device, change

your PC's settings as below.

IP address : 192.168.xxx.xxx

Subnet mask: 255.255.0.0

2010/2‐1

* Models herein and their appearance

are subject to change without any prior

notice.

Power Adaptor Connector (DC 12V)

Reset Button