HIKVISION TURBO HD DS-2CE56D8T-IT3ZF Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para Câmara de segurança HIKVISION TURBO HD DS-2CE56D8T-IT3ZF. HIKVISION TURBO HD DS-2CE56D8T-IT3ZF 17 páginas. Bullet camera &turret camera
Imprimir página
3. Loosen screws to remove the clip plate, and take out
the main body.
4. Install the camera to the ceiling with supplied
screws.
Figure 2-10 Install the Mounting Base to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to install the camera. For wooden
wall/ceiling, self-tapping screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Install the main body to the mounting base and
insert the clip plate.
Figure 2-11 Install the Turret Camera
7. Tighten the screws with the screw driver.
8. Connect the corresponding cables, such as power
cord, and video cable.
9. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Figure 2-9 Remove the Clip Plate
Pan Position
[0°to 360°]
Rotation Position
[0°to 360°]
Figure 2-12 3-axis Adjustment
Tilt Position
[0°to 75°]