HIKVISION TURBO HD DS-2CE56H0T-ITMF Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para Câmara de segurança HIKVISION TURBO HD DS-2CE56H0T-ITMF. HIKVISION TURBO HD DS-2CE56H0T-ITMF 17 páginas. Turbo hd bullet & dome camera
Também para HIKVISION TURBO HD DS-2CE56H0T-ITMF: Manual do utilizador (16 páginas)
Imprimir página
5. Connect the corresponding power cord, and video
cable.
6. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the surveillance angle.
1). Loosen the No.1 adjusting screw to adjust the
rotation position [0° to 360°]. Tighten the No.1
adjusting screw.
2). Loosen the No.2 adjusting screw to adjust the
tilting position [0° to 180°]. Tighten the No. 2
adjusting screw.
3). Loosen the No.3 adjusting screw to adjust the
pan position [0° to 360°]. Tighten the No.3
adjusting screw.
2.3 Ceiling Mounting of Type III Camera
Steps:
1. Paste the dill template to the ceiling.
2. Drill the screw holes and cable hole (optional) in the
ceiling according to the drill template.
Note:
Cable hole is required, when adopting the ceiling
outlet to route cables.
3. Loosen the set screws with a hex wrench (supplied)
to remove the bubble.
4. Fix the mounting base on the ceiling with supplied
screws.
Figure 2-6 3-Axis Adjustment
1
Drill Template
Hole A: for cables routed through the ceiling
screw hole 1: for Mounting Base
Figure 2-7 Drill Template
Figure 2-8 Remove the Bubble
Screw
Hole
1
Cable
Hole
A
1