Decor Star PL-004-SS-TB Manual de instruções de instalação - Página 9

Procurar online ou descarregar pdf Manual de instruções de instalação para Luminárias de casa de banho Decor Star PL-004-SS-TB. Decor Star PL-004-SS-TB 12 páginas.

Imprimir página

Installation (cont.)

Operation

Function Selectors

Temperature Control

IMPORTANT:

The range of the control knob is limited in both clockwise and counter-clockwise directions.

DO NOT force to turn the knob pass its limit. Overturning the control will damage the

thermostatic valve making it fail to regulate temperature.

Water Functions

Overhead Jets

Horizontal Body Jets

Decor Star

8. Once the shower panel has been tested for functions and

leaks. Hang the unit on the wall to complete the installation.

Due to the limited space behind the shower panel, do not

bend the hoses. Any restrictions in the water supply hoses will

greatly reduce the performance of the shower panel. After the

shower panel is set properly on the wall, apply silicon sealant

on both sides of the shower panel to prevent the unit from

moving.

(NOTE: Do not seal the bottom of the panel.)

1. Turn the temperature control knob to set the desired water

temperature. The control is preset to maximum temperature of

100.4 degrees Fahrenheit. To set higher water temperature,

push down the safety pin and turn the dial counterclockwise

to the desired temperature mark. (IMPORTANT: Scalding

may occur if bypass the safety pin, use this control with

caution)

2. Select the desired water function by turning the selector to

the corresponding marking. Multiple functions can be used

simultaneously only if there is adequate water pressure

supplied to the shower panel.

Handheld Shower

Overhead Waterfall

PL-004-SS-TB Rev. C 022018