HIKVISION TurboHD DS-2CE56F7T-VPIT3Z Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Câmara de segurança HIKVISION TurboHD DS-2CE56F7T-VPIT3Z. HIKVISION TurboHD DS-2CE56F7T-VPIT3Z 13 páginas.

Imprimir página

• Contrast: Enhances the difference in color and light

between parts of an image. You can set the value

from 1 to 10.

• Sharpness: Determines the amount of detail an

imaging system can reproduce. You can set the

value from 1 to 10.

• Color Gain: Adjust to change the color saturation.

The value ranges from 1 to 10.

• DNR (Digital Noise Reduction): The DNR function can

decrease the noise effect, especially when

capturing moving images in low light conditions to

deliver more accurate and sharp image quality.

You can set the DNR value from 1 to 10.

• Mirror: Default, H, V, and HV are selectable for

mirror.

- Default: The mirror function is disabled.

- H: The image will be flipped 180 degrees

horizontally.

- V: The image will be flipped 180 degrees

vertically.

- HV: The image will be flipped 180 degrees both

horizontally and vertically.

6.3.8

Reset

Resets all the settings to the default.

6.3.9

Save & Exit

Move the cursor to Save & Exit and press OK to save

the setting and exit the menu.

IR Reflection Prevention

For cameras that support IR, you must pay attention

to the following precautions to prevent IR reflection:

• Dust or grease on the dome cover will cause IR

reflection. Please do not remove the dome cover

film until the installation is finished. If there is dust

or grease on the dome cover, clean the dome cover

with a clean, soft cloth and isopropyl alcohol.

• Make sure that there is no reflective surface too

close to the camera lens. The IR light from the

UM DS-2CE56(D/F)7T-xITxZ TurboHD Dome Camera (UD00351B) 022220NA

VIDEO SETTING

CONTRAST

SHARPNESS

COLOR GAIN

DNR

MIRROR

RETURN

Figure 17, Video Setting

DEFAULT