DecoRad Handmate UV 1800 Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Equipamento industrial DecoRad Handmate UV 1800. DecoRad Handmate UV 1800 18 páginas.

Imprimir página
Handmate UV 1800 Firmware 2.9

4.1 HOW TO START

Press the ON button.
The green indicator will burn. On the
display of the lamp unit the text DONE will
be shown.
Press the button with the "lamp symbol".
The
green
indicator
will
burn.
On the display of the lamp unit the text
WAIT will be shown
When DIM is shown in the display, the
HandMate UV 1800 is ready to use
Use the button on the lamp unit or the
extension handle to start UV curing
(FULL)
ATTENTION
UV curing in FULL power only with a
distance to the object of 2 – 3 cm.
ATTENTION: When DIST is shown in the
display and a beeping signal can be
heard, distance to the object is too large.
UV curing is no longer possible.
Move the lamp unit in a position approx. 3
centimeters from the surface. The beeping
signal will stop. The text DIM will be
shown on the display. From here you can
start curing in FULL.
After 1 minute DIST the text U51 appears
on the display. Turn off the lamp button.
Display moves to COOL and after 8
minutes to DONE.
After leaving the Handmate 5 minutes in
DIM on the start/stop station, U94 appears
on the display. Turn off the lamp button.
Display moves to COOL and after 8
minutes to DONE.
13